Fendt 1149 MT

Original source row explicitly states ECE R 120; kW/CV pair is retained as printed. · The two power units are preserved as the printed pair; neither component is converted or inferred.

Separate original maximum-power row explicitly states ECE R 120; retained separately from nominal power. · A separate OEM maximum-power row, not an inferred increase from nominal power.

The table does not provide a different engine configuration by model column.

No litre conversion.

No model-year or emissions interpretation added.

1500 rpm condition retained; not treated as torque at rated speed.

Decimal .0 preserved; row is not restated as a verified usable-fuel measurement from a separate test.

Decimal .0 preserved.

Range retained as printed; not an operating guarantee or MY-specific range.

Brochure names this transmission for all four columns; no gear ratios or serial/PIN applicability stated here.

No country-specific road approval inferred.

The number is kept without adding rpm because the table does not print a unit on this row.

1980 rpm is not the engine’s rated speed; it belongs to the stated PTO condition.

Keeps this base value separate from the optional pump row.

Option value; not the fitted value on any individual tractor and not added to the base pump.

One printed paired label/value; no separate pressure values are implied.

This is a maximum by group, not proof of installed valves on an individual machine.

Approximation retained; not a service-fill quantity or an inferred exact system capacity.

Do not confuse with the separate maximum oil-fill row.

Table does not state a point-of-measurement condition in this row; do not convert to kg.

Applies to the source’s primary suspension row, not track idler travel.

Kept separate from the primary suspension pivot angle.

Source does not state another track option for this dimension.

The Spanish source distinguishes the roller from the drive wheel.

This is the brochure’s standard row, not proof of fitment on any individual tractor.

Optional row, not proof of individual machine fitment.

The source footnote defines * as country-specific equipment; do not infer which countries or approval.

The source footnote defines * as country-specific equipment; do not infer which countries or approval.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source specifies no model year, PIN, production range or individual tractor configuration. · Slash-separated pair retained in printed order; no conversion.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source gives no model year, PIN, production range or individual machine configuration. · Not a universal gauge for optional tracks.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source gives no model year, PIN, production range or individual machine configuration. · Kept separate from the following maximum-width row.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source gives no model year, PIN, production range or individual machine configuration. · Kept separate from the minimum-width row.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source gives no model year, PIN, production range or individual machine configuration. · Page-23 footnote says 3 m exterior width does not apply for tracks wider than 27.5 inches and track widths over 2,286 mm; its ** marker is printed after the total-length row, so the marker-to-row linkage is ambiguous. This 3000 value remains only the exact standard-track cell.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source gives no model year, PIN, production range or individual machine configuration. · The ** footnote text addresses exterior width for wider belts/track widths, despite the marker being printed on the total-length row. Preserve this source-layout ambiguity; do not apply the footnote as a length condition or silently move its marker.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source gives no model year, PIN, production range or individual machine configuration. · No guidance-system or exhaust configuration is specified in this row.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source gives no model year, PIN, production range or individual machine configuration. · No tyre or track option is attached by the table.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source gives no model year, PIN, production range or individual machine configuration. · The source’s row label says distance between axles, then defines the measured points; this tracked-tractor wording is retained rather than reinterpreted as a conventional wheelbase.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source gives no model year, PIN, production range or individual machine configuration. · This is not a bare chassis weight or payload value.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source gives no model year, PIN, production range or individual machine configuration. · No speed, braking, country approval or axle-load condition is supplied on this row; do not convert it into payload.

Exact printed technical-table model column “1149 MT” in the Fendt 1100 MT Spanish brochure; the source gives no model year, PIN, production range or individual machine configuration. · No hitch subtype or separate vertical/drawbar interpretation is named; keep the source wording and unit.

No connector configuration or machine-specific wiring is stated.