Fendt Farmer 306 LS Turbomatik sedd snett från sidan på en gårdsplan.
Fendt Farmer 306 LS Turbomatik fotograferad före juli 2010.
Foto: joost j. bakker, Wikimedia Commons, CC BY 2.0 · Licens · Bildkälla

Översikt

Mått och vikt

Totalbredd utan ballast: 1 915 mm. Inställning av spårvidd fram: 1 573 mm. Största inställning av spårvidd fram: 1 713 mm. Totallängd utan ballast: 3 923 mm. Hjulbas: 2 320 mm. Totalhöjd till hyttak: 2 597 mm. Markfrigång under framaxelns differential: 437 mm.

Underlag för avsnittet

Faktarader: Totalbredd utan ballast · Totallängd utan ballast · Hjulbas · Totalhöjd till hyttak · Markfrigång under framaxelns differential · Inställning av spårvidd fram · Största inställning av spårvidd fram

Källor: Fendt Farmer 306 LS Turbomatik — DLG Test No. 79-245 / OECD No. 812 Källpost

Kraft, fart och format.

Fendt Farmer 306 LS Turbomatik

Alla tekniska data

Motoreffekt

Maxeffekt i valfritt motortest, 2-timmarsprov52,8 kWMätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.Fakta

Hastighet

Ytterligare växellådsalternativVisad hastighet 40 km/h på skalan 0 till 40 km/h.02040

40 km/h

Källan anger tillval eller maximal utrustning; beställd och monterad utrustning på en enskild traktor är inte fastställd.

Fakta
Fler hastighetsuppgifter
Nominell hastighet på andra överväxelnVisad hastighet 29,8 km/h på skalan 0 till 30 km/h.01530

29,8 km/h

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Fakta
Dragstångsprovets maxeffektrad utan ballastVisad hastighet 2,39 km/h på skalan 0 till 5 km/h.02,55

2,39 km/h

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Fakta
Dragstångsprovets maxeffektrad med ballastVisad hastighet 1,25 km/h på skalan 0 till 5 km/h.02,55

1,25 km/h

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Fakta
Fem timmars dragstångsprov med ballastVisad hastighet 6,85 km/h på skalan 0 till 10 km/h.0510

6,85 km/h

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Fakta

Motor

Cylindervolym4156 cm³Fakta
Motortyp och cylindrarnas placering4 cylindrarFakta

Mått

Angiven variant
Längd och höjd i proportionRektangel proportionerad efter längd 3 923 mm och höjd 2 597 mm. Den visar inte maskinens form.3 923 mm · längd2 597 mm · höjd
Totallängd utan ballast3 923 mmFakta
Totalhöjd till hyttak2 597 mmFakta
Proportion mellan publicerade mått; bilden visar inte maskinens form. Källan anger tillval eller maximal utrustning; beställd och monterad utrustning på en enskild traktor är inte fastställd.
Hjulbas2 320 mmFakta
Totalbredd utan ballast1 915 mmFakta

Hydraulik

Flödesuppgifter per källrad och utförande

Pumpflöde vid lägsta tryck41,1 L/min

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Fakta
Fler flödesuppgifter
Flöde vid 90 % av överströmningsventilens inställning38,4 L/min

Mätvärdet avser provutförandet och villkoren i den angivna rapporten.

Fakta

Tekniska data

Motor och effekt

Farmer 306 LS Turbomatik · Motor och effekt
UppgiftVärde och utförandeKälla
MotortillverkareMotorenwerke Mannheim AG som tryckt

Detta utförande hålls åtskilt från andra modell- och provutföranden.

Källa

Originalvärde: Motorenwerke Mannheim AG as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Make.

Villkor: Engine supplier line; kept separate from model line.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Make",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "MOTORENWERKE MANNHEIM AG",
  "printedUnit": "as printed"
}
MotormodellD-226-4 som tryckt
Källa

Originalvärde: D-226-4 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Model.

Villkor: Exact tested-specimen engine model.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Model",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "D-226-4",
  "printedUnit": "as printed"
}
Motorns serienummerD 226.4.2.15035 som tryckt
Källa

Originalvärde: D 226.4.2.15035 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Serial-No..

Villkor: Engine serial for this specimen only.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Serial-No.",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "D 226.4.2.15035",
  "printedUnit": "as printed"
}
Motortyp och cylindrarnas placeringVattenkyld 4-takts dieselmotor med direktinsprutning, 4 cylindrar i rad och torra cylinderfoder.
Källa

Originalvärde: Water-cooled 4-stroke Diesel engine; direct injection; 4 cylinders in line; dry cylinder liners as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Type and Cylinders.

Villkor: As specified for the tested tractor.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Type and Cylinders",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Watercooled 4-stroke Diesel-engine, direct injection; 4, in line; dry cylinder liners",
  "printedUnit": "as printed"
}
Cylinderdiameter105 mm
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Cylinders.

Villkor: Original unit mm.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Cylinders",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "bore 105 mm",
  "printedUnit": "mm"
}
Slaglängd120 mm
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Cylinders.

Villkor: Original unit mm.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Cylinders",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "stroke 120 mm",
  "printedUnit": "mm"
}
Cylindervolym4156 cm³
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Cylinders.

Villkor: Original unit cm³; no converted displacement.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Cylinders",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "displacement 4156 cm³",
  "printedUnit": "cm³"
}
Kompressionsförhållande16 som tryckt
Källa

Originalvärde: 16 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Cylinders.

Villkor: No decimal fraction printed.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Cylinders",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "compression ratio 16",
  "printedUnit": "as printed"
}
Nominellt motorvarvtal2200 varv/min
Källa

Originalvärde: 2200 rev/min

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Governor.

Villkor: Specification line.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Governor",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "rated engine speed 2200 rev/min",
  "printedUnit": "rev/min"
}
Reglerat motorvarvtalsområde650–2345 varv/min
Källa

Originalvärde: 650–2345 rev/min

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Governor.

Villkor: Specification range for this tested tractor.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Governor",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "governed range of engine speed 650 to 2345 rev/min",
  "printedUnit": "rev/min"
}
Insprutningspump och tillverkarens inställningBOSCH radinsprutningspump PES 4A 80D 320/3 RS 1301; fabriksinställning 53,9 mm³/stroke vid märkt varvtal och full belastning.
Källa

Originalvärde: BOSCH in-line injection pump PES 4A 80D 320/3 RS 1301; production setting 53,9 mm³/stroke at rated speed and full load as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Fuel system.

Villkor: Setting is at rated speed/full load; preserve report wording.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Fuel system",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "BOSCH in line injection pump PES 4A 80D 320/3 RS 1301; manufacturer’s production setting 53,9 mm³/stroke at rated speed and full load",
  "printedUnit": "as printed"
}
Insprutningstidpunkt28° before TDC som tryckt
Källa

Originalvärde: 28° before TDC as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Fuel system.

Villkor: As printed.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Fuel system",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "injection timing 28° before TDC",
  "printedUnit": "as printed"
}
Insprutningsmunstycke och insprutningstryckBOSCH multihole injection nozzles DLLB 150 S 821; injection pressure 180 bar som tryckt
Källa

Originalvärde: BOSCH multihole injection nozzles DLLB 150 S 821; injection pressure 180 bar as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Fuel system.

Villkor: As printed in engine specification.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Fuel system",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "BOSCH multihole injection nozzles DLLB 150 S 821, injection pressure 180 bar",
  "printedUnit": "as printed"
}
Bränsletankens volym108 l

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Engine / Fuel system.

Villkor: Specification, not measured consumption.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Engine / Fuel system",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "capacity of fuel tank 108 l",
  "printedUnit": "l"
}
Motoroljans bytesintervall och volymOljan och filterpatronen byts var 200:e drifttimme; oljemängd 9,5 l.
Källa

Originalvärde: Oil and cartridge change every 200 operating hours; oil capacity 9,5 l as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.5 (printed p.5); Specification of Tractor / Lubrication system.

Villkor: Maintenance specification; capacity is engine lubrication system.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 5,
  "printedPage": 5,
  "row": "Specification of Tractor / Lubrication system",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "oil and cartridge change period 200 operating hours; oil capacity 9,5 l",
  "printedUnit": "as printed"
}
KylsystemVattenkylning med impellerpump; fläkt med 7 blad och 455 mm diameter; vattenvolym 13 l.
Källa

Originalvärde: Water cooling with impeller pump; 7-blade, 455 mm fan; water capacity 13 l as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.5 (printed p.5); Specification of Tractor / Cooling system.

Villkor: As printed.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 5,
  "printedPage": 5,
  "row": "Specification of Tractor / Cooling system",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Watercooling with impeller pump; fan with 7 blades, 455 mm dia; water capacity 13 l",
  "printedUnit": "as printed"
}
Maxeffekt i valfritt motortest, 2-timmarsprov52,8 kW

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.27 (printed p.27); Optional tests / Engine performance / Maximum power / At 2-hour test.

Villkor: Optional engine-only dynamometer test; 17 December 1980; Schenck eddy-current dynamometer W 150. Not the compulsory PTO output or manufacturer-rated power.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 27,
  "printedPage": 27,
  "row": "Optional tests / Engine performance / Maximum power / At 2-hour test",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "52,8 kW",
  "printedUnit": "kW"
}
Motorvarvtal vid maxeffekt i valfritt 2-timmarsprov2200 varv/min

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: 2200 rev/min

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.27 (printed p.27); Optional tests / Engine performance / Maximum power / At 2-hour test.

Villkor: Same optional engine-only 2-hour test row.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 27,
  "printedPage": 27,
  "row": "Optional tests / Engine performance / Maximum power / At 2-hour test",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2200 rev/min",
  "printedUnit": "rev/min"
}
Specifik bränsleförbrukning vid maxeffekt i valfritt 2-timmarsprov224 g/kWh

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.27 (printed p.27); Optional tests / Engine performance / Maximum power / At 2-hour test.

Villkor: Optional engine-only dynamometer test; separate from PTO and drawbar consumption.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 27,
  "printedPage": 27,
  "row": "Optional tests / Engine performance / Maximum power / At 2-hour test",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "224 g/kWh",
  "printedUnit": "g/kWh"
}
Vridmoment vid maxeffekt i valfritt motortest229 Nm

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.27 (printed p.27); Optional tests / Engine performance / Torque at maximum power (2 hours).

Villkor: Optional engine test; report says equivalent flywheel torque.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 27,
  "printedPage": 27,
  "row": "Optional tests / Engine performance / Torque at maximum power (2 hours)",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "229 Nm",
  "printedUnit": "Nm"
}
Högsta vridmoment i valfritt motortestVridmoment 277 Nm vid motorvarvtal 1396 varv/min.

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: 277 at 1396 engine rev/min Nm; engine rev/min

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.27 (printed p.27); Optional tests / Engine performance / Maximum torque.

Villkor: Optional engine-only test; source states maximum torque at 1396 engine rev/min.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 27,
  "printedPage": 27,
  "row": "Optional tests / Engine performance / Maximum torque",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "277 Nm at 1396 rev/min of the engine",
  "printedUnit": "Nm"
}
Högsta obelastade motorvarvtal i valfritt test2344 varv/min

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: 2344 rev/min

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.27 (printed p.27); Optional tests / Engine performance / No load maximum engine speed.

Villkor: Optional engine-only test.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 27,
  "printedPage": 27,
  "row": "Optional tests / Engine performance / No load maximum engine speed",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2344 rev/min",
  "printedUnit": "rev/min"
}

Dragstångsprov

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Farmer 306 LS Turbomatik · Dragstångsprov
UppgiftVärde och utförandeKälla
Dragstångsprovets maxeffektrad utan ballastVäxel 2 A FS; hastighet 2,39 km/h; dragstångseffekt 26,8 kW; dragkraft 4039 daN; motorvarvtal 2255 rev/min; hjulslirning 14,9%
Källa

Originalvärde: Gear 2 A FS; 2,39 km/h; 26,8 kW; 4039 daN; engine 2255 rev/min; wheel slip 14,9% as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.20 (printed p.20); Drawbar performance / MAXIMUM POWER (unballasted), drawbar height 460 mm / gear 2 A FS.

Villkor: Compulsory drawbar test on concrete; 23–30 March 1981; unballasted; drawbar 460 mm above ground. 26,8 kW is drawbar power, not engine power.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 20,
  "printedPage": 20,
  "row": "Drawbar performance / MAXIMUM POWER (unballasted), drawbar height 460 mm / gear 2 A FS",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2 A FS | 2,39 | 26,8 | 4039 | 2255 | 14,9",
  "printedUnit": "as printed"
}
Dragstångsprovets maxeffektrad med ballastVäxel 1 A FL; hastighet 1,25 km/h; dragstångseffekt 19,1 kW; dragkraft 5509 daN; motorvarvtal 2273 rev/min; hjulslirning 14,9%
Källa

Originalvärde: Gear 1 A FL; 1,25 km/h; 19,1 kW; 5509 daN; engine 2273 rev/min; wheel slip 14,9% as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.20 (printed p.20); Drawbar performance / MAXIMUM POWER (ballasted), drawbar height 450 mm / gear 1 A FL.

Villkor: Compulsory drawbar test on concrete; ballasted, with the stated drawbar height 450 mm above ground. This is the p.20 maximum-power section row. 19,1 kW is drawbar power and 5509 daN is drawbar pull, not engine power or torque.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 20,
  "printedPage": 20,
  "row": "Drawbar performance / MAXIMUM POWER (ballasted), drawbar height 450 mm / gear 1 A FL",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "1 A FL | 1,25 | 19,1 | 5509 | 2273 | 14,9",
  "printedUnit": "as printed"
}

Transmission

Farmer 306 LS Turbomatik · Transmission
UppgiftVärde och utförandeKälla
Växellådans uppbyggnadEgentillverkad synkroniserad växellåda med 3 framåtväxlar och 1 backväxel; två synkroniserade hög-/låggrupper; väggruppen S växlas med krage och fältgruppen A med glidväxel.

Detta utförande hålls åtskilt från andra modell- och provutföranden.

Källa

Originalvärde: Own-make synchromesh speed-change gearbox; 3 forward speeds and 1 reverse; two synchronized high/low group gears; collar-shift road group (S), sliding-gear field group (A) as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.6 (printed p.6); Specification of Tractor / Transmission / Gear box.

Villkor: Grouped specification; no claim that separately numbered clutch entries are alternatives.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 6,
  "printedPage": 6,
  "row": "Specification of Tractor / Transmission / Gear box",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Own make synchromesh speed change gear with 3 forward speeds and 1 reverse speed; 2 group gears: synchronized fine stepped group gear high/low (FS/FL); collar shifted road group (S); sliding gear shifted field group (A)",
  "printedUnit": "as printed"
}
Framåt- och backväxlar på den testade traktorn14 framåtväxlar; 4 backväxlar.

Källan anger tillval eller maximal utrustning; beställd och monterad utrustning på en enskild traktor är inte fastställd.

Källa

Originalvärde: 14 forward speeds; 4 reverse speeds as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.6 (printed p.6); Specification of Tractor / Transmission / Gear box.

Villkor: Tested tractor configuration; optional speeds/groups described separately.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 6,
  "printedPage": 6,
  "row": "Specification of Tractor / Transmission / Gear box",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "totally 14 forward speeds and 4 reverse speeds on tested tractor",
  "printedUnit": "as printed"
}
Ytterligare växellådsalternativTvå oberoende synkroniserade överväxlar; en tredje överväxel för 40 km/h och krypväxelgrupp finns som tillval.

Källan anger tillval eller maximal utrustning; beställd och monterad utrustning på en enskild traktor är inte fastställd.

Källa

Originalvärde: Two independent synchronized overdrive speeds; optional third overdrive speed (40 km/h) and optional creeper group as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.6 (printed p.6); Specification of Tractor / Transmission / Gear box.

Villkor: Optional items are not represented as fitted on the specimen.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 6,
  "printedPage": 6,
  "row": "Specification of Tractor / Transmission / Gear box",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2 independent synchronized overdrive speeds, optionally third overdrive speed (40 km/h) available; optionally available creeper group",
  "printedUnit": "as printed"
}
Nominell hastighet på andra överväxeln29,80 km/h

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.7 (printed p.7); Total ratios and speeds / 2nd overdrive.

Villkor: Nominal speed calculated at rated engine speed; report footnote uses radius index 745 mm and fluid-clutch slip of 2,5% measured at rated speed and maximum power.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 7,
  "printedPage": 7,
  "row": "Total ratios and speeds / 2nd overdrive",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2nd overdrive; 29,80 km/h",
  "printedUnit": "km/h"
}
DifferentialspärrPedal-operated, not self-disengaging; pilot lamp som tryckt
Källa

Originalvärde: Pedal-operated, not self-disengaging; pilot lamp as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.6 (printed p.6); Specification of Tractor / Rear axle.

Villkor: Rear axle specification.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 6,
  "printedPage": 6,
  "row": "Specification of Tractor / Rear axle",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "bevel gear differential with pedal operated lock, not selfdisengaging; differential lock with pilot lamp",
  "printedUnit": "as printed"
}
Vätskekopplingens oljekapacitet och viskositetFluid clutch: 5,8 l; SAE 10W som tryckt
Källa

Originalvärde: Fluid clutch: 5,8 l; SAE 10W as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for these specification/service rows; the official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are report/test dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.7 (printed p.7); Oil capacity and viscosity / Fluid clutch.

Villkor: Report-era specification; verify current fluid compatibility from applicable service documentation.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 7,
  "printedPage": 7,
  "row": "Oil capacity and viscosity / Fluid clutch",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Fluid clutch 5,8 l; SAE 10W",
  "printedUnit": "as printed"
}
Växellådans oljekapacitet och viskositetGear box: 32,5 l; SAE 80 som tryckt
Källa

Originalvärde: Gear box: 32,5 l; SAE 80 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for these specification/service rows; the official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are report/test dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.7 (printed p.7); Oil capacity and viscosity / Gear box.

Villkor: Report-era specification; verify current fluid compatibility from applicable service documentation.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 7,
  "printedPage": 7,
  "row": "Oil capacity and viscosity / Gear box",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "gear box 32,5 l; SAE 80",
  "printedUnit": "as printed"
}
Bakaxelns slutväxlar: oljekapacitet och viskositetRear axle final drives: 3,0 l each; SAE 90 som tryckt
Källa

Originalvärde: Rear axle final drives: 3,0 l each; SAE 90 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for these specification/service rows; the official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are report/test dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.7 (printed p.7); Oil capacity and viscosity / Rear axle final drives.

Villkor: Report-era specification; verify current fluid compatibility from applicable service documentation.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 7,
  "printedPage": 7,
  "row": "Oil capacity and viscosity / Rear axle final drives",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "rear axle final drives 3,0 l each; SAE 90",
  "printedUnit": "as printed"
}
Framaxeldifferentialens oljekapacitet och viskositetFront axle differential: 4,8 l; SAE 90 som tryckt
Källa

Originalvärde: Front axle differential: 4,8 l; SAE 90 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for these specification/service rows; the official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are report/test dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.7 (printed p.7); Oil capacity and viscosity / Front axle differential.

Villkor: Report-era specification; verify current fluid compatibility from applicable service documentation.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 7,
  "printedPage": 7,
  "row": "Oil capacity and viscosity / Front axle differential",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "front axle differential 4,8 l; SAE 90",
  "printedUnit": "as printed"
}
Framaxelns slutväxlar: oljekapacitet och viskositetFront axle final drives: 0,5 l each; SAE 90 som tryckt
Källa

Originalvärde: Front axle final drives: 0,5 l each; SAE 90 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for these specification/service rows; the official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are report/test dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.7 (printed p.7); Oil capacity and viscosity / Front axle final drives.

Villkor: Report-era specification; verify current fluid compatibility from applicable service documentation.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 7,
  "printedPage": 7,
  "row": "Oil capacity and viscosity / Front axle final drives",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "front axle final drives 0,5 l each; SAE 90",
  "printedUnit": "as printed"
}
Växellåds- och transmissionsdelarnas oljebytesintervallVätskekopplingens olja byts efter 5000 drifttimmar; övriga växlar efter 1000 drifttimmar eller årligen.
Källa

Originalvärde: Fluid clutch: all 5000 operating hours; other gears: all 1000 operating hours or once a year operating hours; calendar interval

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for these specification/service rows; the official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are report/test dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.6 (printed p.6); Transmission / Oil change.

Villkor: The report does not enumerate which individual gear units are included under “other gears.”

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 6,
  "printedPage": 6,
  "row": "Transmission / Oil change",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Fluid clutch — all 5000 operating hours; other gears — all 1000 operating hours or once a year",
  "printedUnit": "as printed"
}
Rapporterade oljekvaliteter för transmissionenVäxellåda: MIL-L-2105; slutväxlar och framaxelns differential: MIL-L-2105 B.
Källa

Originalvärde: Gear box: MIL-L-2105; final drives and front axle differential: MIL-L-2105 B as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for these specification/service rows; the official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are report/test dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.6 (printed p.6); Transmission / Recommended oil qualities.

Villkor: Do not treat the historical oil specifications as present-day service advice.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 6,
  "printedPage": 6,
  "row": "Transmission / Recommended oil qualities",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Gear box MIL-L-2105; final drives and front axle differential MIL-L-2105 B",
  "printedUnit": "as printed"
}

Hydraulik och lyft

Farmer 306 LS Turbomatik · Hydraulik och lyft
UppgiftVärde och utförandeKälla
Hydraulkrets och pumpÖppet hydraulsystem; motordriven BOSCH tandempump HY/ZFFS 11/16+14; pumpvolym 16 cm³/rev eller flöde 37,4 l/min vid märkt motorvarvtal.

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: Open-centre system; BOSCH tandem gear pump HY/ZFFS 11/16+14 directly driven by engine; delivery 16 cm³/rev or 37,4 l/min at rated engine speed as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.9 (printed p.9); Specification of Tractor / Hydraulic system.

Villkor: Specification flow at rated engine speed; do not call isolated test flow total system flow.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 9,
  "printedPage": 9,
  "row": "Specification of Tractor / Hydraulic system",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Open centre system; BOSCH tandem gear type pump HY/ZFFS 11/16+14 directly driven by engine, delivery 16 cm³/rev or 37,4 l/min at rated engine speed",
  "printedUnit": "as printed"
}
Kategori för bakre trepunktslyftThree-point linkage, ISO 730/I or DIN 9674, category 2 som tryckt
Källa

Originalvärde: Three-point linkage, ISO 730/I or DIN 9674, category 2 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.10 (printed p.10); Specification of Tractor / Implement linkage at rear.

Villkor: Either reference is printed; no category conversion.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 10,
  "printedPage": 10,
  "row": "Specification of Tractor / Implement linkage at rear",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Three point linkage ISO 730/I or DIN 9674, category 2",
  "printedUnit": "as printed"
}
Bakre lyftarmars lyfthöjd över marken170 to 1275 mm
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.10 (printed p.10); Specification of Tractor / Implement linkage at rear.

Villkor: Specification range.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 10,
  "printedPage": 10,
  "row": "Specification of Tractor / Implement linkage at rear",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "lifting range above ground from 170 to 1275 mm",
  "printedUnit": "mm"
}
Uppmätt vertikal rörelse för nedre lyftarmar705 mm

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Power lift test / At hitch points.

Villkor: DLG power-lift test, down-position lower hitch height 170 mm; hydraulic-fluid start temperature 65°C; separate from specification lifting range.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Power lift test / At hitch points",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Vertical movement 705 mm",
  "printedUnit": "mm"
}
Maximal lyftkraft vid lyftarmarnas kulor genom hela lyftområdet2100 daN

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Detta utförande hålls åtskilt från andra modell- och provutföranden.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Power lift test / At hitch points.

Villkor: The upper p.25 power-lift summary reports 2100 daN at hitch points through full range. The separate position-by-position table below it lists values from 2100 to 2420 daN, including 2420 daN at tmm 0. Keep the summary row distinct from single-position values; do not present 2100 as the point peak or substitute 2420 for the through-range summary.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Power lift test / At hitch points",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Max. force exerted through full range 2100 daN",
  "printedUnit": "daN"
}
Maximal lyftkraft på testram genom hela lyftområdet1710 daN

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Detta utförande hålls åtskilt från andra modell- och provutföranden.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Power lift test / On the frame.

Villkor: The upper p.25 power-lift summary reports 1710 daN on the frame through full range. The separate position-by-position table below it lists forces up to 2040 daN. Keep the summary row distinct from the position-specific measurements; do not present 1710 as the point peak or replace it with a single-position value.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Power lift test / On the frame",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Max. force exerted through full range 1710 daN",
  "printedUnit": "daN"
}
Tryck vid maximal lyftkraft158 bar

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Power lift test / Corresponding pressure of hydraulic fluid.

Villkor: Measured condition associated with power-lift test; fluid 65°C at test start.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Power lift test / Corresponding pressure of hydraulic fluid",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "158 bar",
  "printedUnit": "bar"
}
Största lutningsvinkel för masten genom lyftområdet13 grader

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: 13 degrees

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Power lift test / On the frame.

Villkor: Test-frame condition; mast angle from vertical to max. height.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Power lift test / On the frame",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Max. tilt angle of mast over range of lift 13 degrees",
  "printedUnit": "degrees"
}
Öppningstryck för fjärrhydraulikens överströmningsventil158 bar

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Hydraulic pump performance / Opening pressure of the relief valve in remote circuit.

Villkor: Hydraulic pump test; rear tapping; test-fluid temperature 65°C.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Hydraulic pump performance / Opening pressure of the relief valve in remote circuit",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "158 bar",
  "printedUnit": "bar"
}
Bibehållet tryck med överströmningsventilen öppen178 bar

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Hydraulic pump performance / Sustained pressure with relief valve open.

Villkor: Hydraulic pump test; preserved as its own stated condition.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Hydraulic pump performance / Sustained pressure with relief valve open",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "178 bar",
  "printedUnit": "bar"
}
Pumpflöde vid lägsta tryck41,1 l/min

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Hydraulic pump performance / Pump delivery rate at minimum pressure.

Villkor: Governor control lever set for maximum power; hydraulic pump test at rear tapping.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Hydraulic pump performance / Pump delivery rate at minimum pressure",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "41,1 l/min",
  "printedUnit": "l/min"
}
Hydraulikeffekt vid 90 % av överströmningsventilens inställning10,2 kW

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Detta utförande hålls åtskilt från andra modell- och provutföranden.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Hydraulic pump performance / Hydraulic power at 90% of relief valve setting.

Villkor: Tested hydraulic power; corresponding flow, pressure and oil temperature are separately recorded.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Hydraulic pump performance / Hydraulic power at 90% of relief valve setting",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "10,2 kW",
  "printedUnit": "kW"
}
Flöde vid 90 % av överströmningsventilens inställning38,4 l/min

Mätvärdet avser provutförandet och villkoren i den angivna rapporten.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Hydraulic pump performance / Corresponding delivery rate.

Villkor: Corresponding to 10,2 kW at 160 bar; hydraulic fluid 65°C.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Hydraulic pump performance / Corresponding delivery rate",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "38,4 l/min",
  "printedUnit": "l/min"
}
Tryck vid provpunkt på 90 % av överströmningsventilens inställning160 bar

Mätvärdet avser provutförandet och villkoren i den angivna rapporten.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Hydraulic pump performance / Pressure.

Villkor: Corresponding to 10,2 kW and 38,4 l/min; hydraulic fluid 65°C.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Hydraulic pump performance / Pressure",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "160 bar",
  "printedUnit": "bar"
}
Hydrauloljans temperatur under pumpprovet65 °C

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.25 (printed p.25); Hydraulic pump performance / Temperature of hydraulic fluid.

Villkor: Test condition.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 25,
  "printedPage": 25,
  "row": "Hydraulic pump performance / Temperature of hydraulic fluid",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "65°C",
  "printedUnit": "°C"
}
Hydrauliksystemets separata oljetankSeparate hydraulic tank: 20 l capacity l
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for these specification/service rows; the official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are report/test dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.9 (printed p.9); Power lift / Hydraulic system / separate hydraulic tank.

Villkor: Not a verified total combined system volume.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 9,
  "printedPage": 9,
  "row": "Power lift / Hydraulic system / separate hydraulic tank",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "separate hydraulic tank with 20 l capacity",
  "printedUnit": "l"
}
Maximalt oljeuttag via hydraulikuttagMaximum take-off: 8 l while travelling; 16 l when stationary l
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for these specification/service rows; the official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are report/test dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.9 (printed p.9); Power lift / Hydraulic system / oil take-off through tappings.

Villkor: Report-era configuration values; not a current operating recommendation.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 9,
  "printedPage": 9,
  "row": "Power lift / Hydraulic system / oil take-off through tappings",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "max. 8 l may be taken off while tractor is travelling; 16 l when tractor is working stationary",
  "printedUnit": "l"
}
Hydraulikfiltrets bytesintervallUtbytbart returledningsfilter byts efter 1000 drifttimmar eller årligen.
Källa

Originalvärde: Replaceable return-line filter cartridge: change after 1000 operating hours or once a year operating hours; calendar interval

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for these specification/service rows; the official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are report/test dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.9 (printed p.9); Power lift / Hydraulic system / filter in return oil line.

Villkor: Not a current service schedule.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 9,
  "printedPage": 9,
  "row": "Power lift / Hydraulic system / filter in return oil line",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "hydraulic filter with replaceable cartridge incorporated in return oil line; cartridge change after 1000 operating hours or once a year",
  "printedUnit": "as printed"
}
Rapporterad hydraulikolja och bytesintervallRekommenderad hydraulolja enligt källan: motorolja SAE 20W/20 (i tropikerna SAE 30), MIL-L-2104C eller MIL-L-46 152; oljebyte efter 1000 drifttimmar eller årligen.
Källa

Originalvärde: Recommended oil listed under hydraulic system: engine oil SAE 20W/20 (tropics SAE 30), MIL-L-2104C or MIL-L-46 152; oil change after 1000 operating hours or once a year as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for these specification/service rows; the official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are report/test dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.9 (printed p.9); Power lift / Hydraulic system / recommended oil and oil change.

Villkor: Not current oil compatibility or maintenance advice.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 9,
  "printedPage": 9,
  "row": "Power lift / Hydraulic system / recommended oil and oil change",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "recommended oil: engine oil SAE 20W/20 (tropics SAE 30), MIL-L-2104C or MIL-L-46 152; oil change after 1000 operating hours or once a year",
  "printedUnit": "as printed"
}

Kraftuttag

Farmer 306 LS Turbomatik · Kraftuttag
UppgiftVärde och utförandeKälla
Bakre kraftuttagets huvudkoppling och manövreringBakre kraftuttag; torr flerskivskoppling, oberoende av körkopplingen; manövreras med handspak på konsolen.

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: Rear PTO; dry multiplate clutch, independent from driving clutch; operated by hand lever on console as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.8 (printed p.8); Specification of Tractor / Power take-off / Main PTO.

Villkor: Main PTO specification; separate from PTO test output.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 8,
  "printedPage": 8,
  "row": "Specification of Tractor / Power take-off / Main PTO",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "At rear of tractor; driven by a dry multiplate clutch, independent from driving clutch; operated by hand lever on console",
  "printedUnit": "as printed"
}
Valbara hastigheter på bakre kraftuttagetTwo speeds preselectable by hand lever: 1000 and 540 varv/min

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: Two speeds preselectable by hand lever: 1000 and 540 rev/min

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.8 (printed p.8); Specification of Tractor / Power take-off / Main PTO.

Villkor: Specification speed selections; not measured output power.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 8,
  "printedPage": 8,
  "row": "Specification of Tractor / Power take-off / Main PTO",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2 speeds preselectable by hand lever: 1000 rev/min p.t.o.; 540 rev/min p.t.o.",
  "printedUnit": "rev/min"
}
Uppmätt bakre kraftuttagsvarvtal vid nominellt motorvarvtal och full belastning1035 varv/min
Källa

Originalvärde: 1035 rev/min

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.8 (printed p.8); Specification of Tractor / Power take-off / Main PTO / 1000 rev/min.

Villkor: At 1000 rev/min PTO setting.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 8,
  "printedPage": 8,
  "row": "Specification of Tractor / Power take-off / Main PTO / 1000 rev/min",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "1035 rev/min at rated engine speed and full load",
  "printedUnit": "rev/min"
}
Uppmätt obelastat bakre kraftuttagsvarvtal vid nominellt motorvarvtal1062 varv/min
Källa

Originalvärde: 1062 rev/min

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.8 (printed p.8); Specification of Tractor / Power take-off / Main PTO / 1000 rev/min.

Villkor: At 1000 rev/min PTO setting.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 8,
  "printedPage": 8,
  "row": "Specification of Tractor / Power take-off / Main PTO / 1000 rev/min",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "1062 rev/min at rated engine speed with no load",
  "printedUnit": "rev/min"
}
Bakre kraftuttag på 750 varv/min (tillval)Kunde beställas som alternativ till kraftuttag 1000 rev/min.

Källan anger tillval eller maximal utrustning; beställd och monterad utrustning på en enskild traktor är inte fastställd.

Källa

Originalvärde: Optionally available instead of 1000 rev/min PTO as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.8 (printed p.8); Specification of Tractor / Power take-off / Main PTO.

Villkor: Optional, not treated as fitted.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 8,
  "printedPage": 8,
  "row": "Specification of Tractor / Power take-off / Main PTO",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "optionally available p.t.o. with 750 rev/min instead of 1000 rev/min p.t.o.",
  "printedUnit": "as printed"
}
Främre kraftuttag (tillval)1000 varv/min; inte monterat på provtraktorn.

Källan anger tillval eller maximal utrustning; beställd och monterad utrustning på en enskild traktor är inte fastställd.

Källa

Originalvärde: 1000 rev/min; not fitted on tested tractor as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.8 (printed p.8); Specification of Tractor / Secondary PTO.

Villkor: Explicitly optional and not fitted.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 8,
  "printedPage": 8,
  "row": "Specification of Tractor / Secondary PTO",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Optionally available front p.t.o. (1000 rev/min), not fitted on tested tractor",
  "printedUnit": "as printed"
}
Maxeffekt vid obligatoriskt huvudkraftuttagsprov47,1 kW

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.16 (printed p.16); Main power take-off performance (1000 rev/min) / Maximum power / At 2-hour test.

Villkor: Compulsory PTO test; 17 December 1980; Schenck hydraulic dynamometer U1-40; nominal PTO test setting 1000 rev/min.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 16,
  "printedPage": 16,
  "row": "Main power take-off performance (1000 rev/min) / Maximum power / At 2-hour test",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "47,1 kW",
  "printedUnit": "kW"
}
Motorvarvtal vid maxeffekt i obligatoriskt kraftuttagsprov2200 varv/min

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: 2200 rev/min

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.16 (printed p.16); Main power take-off performance (1000 rev/min) / Maximum power / At 2-hour test.

Villkor: Same 2-hour PTO test row; not an engine-power rating.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 16,
  "printedPage": 16,
  "row": "Main power take-off performance (1000 rev/min) / Maximum power / At 2-hour test",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2200 rev/min",
  "printedUnit": "rev/min"
}
Kraftuttagsvarvtal vid maxeffektraden1035 varv/min

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: 1035 rev/min

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.16 (printed p.16); Main power take-off performance (1000 rev/min) / Maximum power / At 2-hour test.

Villkor: Measured PTO shaft speed in the 2-hour row; separate from nominal 1000 rev/min setting.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 16,
  "printedPage": 16,
  "row": "Main power take-off performance (1000 rev/min) / Maximum power / At 2-hour test",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "1035 rev/min",
  "printedUnit": "rev/min"
}
Specifik bränsleförbrukning vid maxeffekt i obligatoriskt kraftuttagsprov250 g/kWh

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.16 (printed p.16); Main power take-off performance (1000 rev/min) / Maximum power / At 2-hour test.

Villkor: PTO test row; not engine-only specific consumption.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 16,
  "printedPage": 16,
  "row": "Main power take-off performance (1000 rev/min) / Maximum power / At 2-hour test",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "250 g/kWh",
  "printedUnit": "g/kWh"
}

Underrede och band

Farmer 306 LS Turbomatik · Underrede och band
UppgiftVärde och utförandeKälla
Framdäck12,4-24; 6 ply som tryckt
Källa

Originalvärde: 12,4-24; 6 ply as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.12 (printed p.12); Specification of Tractor / Wheels / Steered wheels.

Villkor: Specification of steered/front wheels.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 12,
  "printedPage": 12,
  "row": "Specification of Tractor / Wheels / Steered wheels",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2 pneumatics in front 12,4-24 6 ply, diagonal type casing",
  "printedUnit": "as printed"
}
Bakdäck16,9 R 34; 8 ply som tryckt
Källa

Originalvärde: 16,9 R 34; 8 ply as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.12 (printed p.12); Specification of Tractor / Wheels / Driven wheels.

Villkor: Specification of driven/rear wheels.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 12,
  "printedPage": 12,
  "row": "Specification of Tractor / Wheels / Driven wheels",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2 pneumatics 16,9 R 34 8 ply, radial type casing",
  "printedUnit": "as printed"
}
Högsta tillåtna belastning per framdäck1200 kg per däck
Källa

Originalvärde: 1200 kg per tire

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.12 (printed p.12); Specification of Tractor / Wheels / Steered wheels.

Villkor: Load limit only under stated inflation pressure and speed.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 12,
  "printedPage": 12,
  "row": "Specification of Tractor / Wheels / Steered wheels",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "max. permissible load per tyre 1200 kg at 1,7 bar inflation pressure and 30 km/h",
  "printedUnit": "kg per tire"
}
Högsta tillåtna belastning per bakdäck2380 kg per däck
Källa

Originalvärde: 2380 kg per tire

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.12 (printed p.12); Specification of Tractor / Wheels / Driven wheels.

Villkor: Load limit only under stated inflation pressure and speed.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 12,
  "printedPage": 12,
  "row": "Specification of Tractor / Wheels / Driven wheels",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "max. permissible load per tyre 2380 kg at 1,7 bar inflation pressure and 30 km/h",
  "printedUnit": "kg per tire"
}
Kraft på parkeringsbromsens reglage i lutningBallasterad traktor i 18% lutning: 23 daN uppför, 22 daN nedför; oballasterad traktor med 3000 kg släp i 12% lutning: 18 daN uppför, 19 daN nedför.
Källa

Originalvärde: Ballasted tractor on 18% slope: up 23 daN, down 22 daN; unballasted tractor with 3000 kg trailer on 12% slope: up 18 daN, down 19 daN daN

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.23 (printed p.23); Braking / Parking brake / control force.

Villkor: Slope, trailer and ballast conditions are part of the result.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 23,
  "printedPage": 23,
  "row": "Braking / Parking brake / control force",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "ballasted tractor on 18%-slope: up 23, down 22; unballasted tractor with trailer of 3000 kg on 12%-slope: up 18, down 19",
  "printedUnit": "daN"
}

Mått och vikt

Farmer 306 LS Turbomatik · Mått och vikt
UppgiftVärde och utförandeKälla
Inställning av spårvidd fram1573 mm

Detta utförande hålls åtskilt från andra modell- och provutföranden.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.12 (printed p.12); Specification of Tractor / Wheels / Steered wheels.

Villkor: Starting track value; adjustment is separately stated.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 12,
  "printedPage": 12,
  "row": "Specification of Tractor / Wheels / Steered wheels",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "track width 1573 mm; adjustable to 1713 mm by reversing wheels",
  "printedUnit": "mm"
}
Största inställning av spårvidd fram1713 mm
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.12 (printed p.12); Specification of Tractor / Wheels / Steered wheels.

Villkor: Method: reversing wheels.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 12,
  "printedPage": 12,
  "row": "Specification of Tractor / Wheels / Steered wheels",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "track width adjustable to 1713 mm by reversing wheels",
  "printedUnit": "mm"
}
Inställning av spårvidd bak1508 mm

Detta utförande hålls åtskilt från andra modell- och provutföranden.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.12 (printed p.12); Specification of Tractor / Wheels / Driven wheels.

Villkor: Starting track value; adjustment is separately stated.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 12,
  "printedPage": 12,
  "row": "Specification of Tractor / Wheels / Driven wheels",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "track width 1508 mm, adjustable to 1652 mm by reversing wheels",
  "printedUnit": "mm"
}
Största inställning av spårvidd bak1652 mm
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.12 (printed p.12); Specification of Tractor / Wheels / Driven wheels.

Villkor: Method: reversing wheels.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 12,
  "printedPage": 12,
  "row": "Specification of Tractor / Wheels / Driven wheels",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "track width adjustable to 1652 mm by reversing wheels",
  "printedUnit": "mm"
}
Hjulbas2320 mm
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.12 (printed p.12); Specification of Tractor / Wheels / Wheel base.

Villkor: As specified.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 12,
  "printedPage": 12,
  "row": "Specification of Tractor / Wheels / Wheel base",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2320 mm",
  "printedUnit": "mm"
}
Totallängd utan ballast3923 mm
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.13 (printed p.13); Specification of Tractor / Dimensions / Total length.

Villkor: Configuration label retained.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 13,
  "printedPage": 13,
  "row": "Specification of Tractor / Dimensions / Total length",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "3923 mm without ballast",
  "printedUnit": "mm"
}
Totalbredd utan ballast1915 mm
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.13 (printed p.13); Specification of Tractor / Dimensions / Total width.

Villkor: Configuration label retained.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 13,
  "printedPage": 13,
  "row": "Specification of Tractor / Dimensions / Total width",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "1915 mm without ballast",
  "printedUnit": "mm"
}
Totalhöjd till hyttak2597 mm

Källan anger tillval eller maximal utrustning; beställd och monterad utrustning på en enskild traktor är inte fastställd.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.13 (printed p.13); Specification of Tractor / Dimensions / Total height.

Villkor: Cab roof configuration; optional roof is described as 70 mm lower.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 13,
  "printedPage": 13,
  "row": "Specification of Tractor / Dimensions / Total height",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2597 mm to top of cab roof",
  "printedUnit": "mm"
}
Markfrigång under framaxelns differential437 mm

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.13 (printed p.13); Specification of Tractor / Dimensions / Ground clearance.

Villkor: Measurement location retained.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 13,
  "printedPage": 13,
  "row": "Specification of Tractor / Dimensions / Ground clearance",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "437 mm below front axle differential",
  "printedUnit": "mm"
}
Vikt vid dragstångsprov utan ballast och utan förareFront 1410 kg; rear 2205 kg; total 3615 kg kg

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.15 (printed p.15); Test conditions / Weights / Without ballast / Without driver.

Villkor: Measured test weight; no driver, no ballast; not shipping or retail mass.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 15,
  "printedPage": 15,
  "row": "Test conditions / Weights / Without ballast / Without driver",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "front 1410 kg; rear 2205 kg; total 3615 kg",
  "printedUnit": "kg"
}
Vikt vid dragstångsprov utan ballast och med förareFront 1425 kg; rear 2270 kg; total 3695 kg kg

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.15 (printed p.15); Test conditions / Weights / Without ballast / With driver.

Villkor: Measured test weight; driver included; no ballast.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 15,
  "printedPage": 15,
  "row": "Test conditions / Weights / Without ballast / With driver",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "front 1425 kg; rear 2270 kg; total 3695 kg",
  "printedUnit": "kg"
}
Vattenballast i framdäcken217 kg
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.15 (printed p.15); Test conditions / Ballast in front.

Villkor: Ballast component only.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 15,
  "printedPage": 15,
  "row": "Test conditions / Ballast in front",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "water in the tyres 217 kg",
  "printedUnit": "kg"
}
Främre ramvikter196 kg
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.15 (printed p.15); Test conditions / Ballast in front.

Villkor: Ballast component only.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 15,
  "printedPage": 15,
  "row": "Test conditions / Ballast in front",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "1 front frame 196 kg",
  "printedUnit": "kg"
}
Sammanlagd vikt av frontvikter514 kg
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.15 (printed p.15); Test conditions / Ballast in front.

Villkor: Ballast component total as printed; no per-weight inference.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 15,
  "printedPage": 15,
  "row": "Test conditions / Ballast in front",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "14 weights, total weight 514 kg",
  "printedUnit": "kg"
}
Bakre ramvikter300 kg
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.15 (printed p.15); Test conditions / Ballast at rear.

Villkor: Ballast component only.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 15,
  "printedPage": 15,
  "row": "Test conditions / Ballast at rear",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "1 rear frame 300 kg",
  "printedUnit": "kg"
}
Sammanlagd vikt av bakvikter578 kg
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.15 (printed p.15); Test conditions / Ballast at rear.

Villkor: Ballast component total as printed; no per-weight inference.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 15,
  "printedPage": 15,
  "row": "Test conditions / Ballast at rear",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "17 weights, total weight 578 kg",
  "printedUnit": "kg"
}
Vikt vid dragstångsprov med ballast och förareFront 2200 kg; rear 3300 kg; total 5500 kg kg

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.15 (printed p.15); Test conditions / Weights / With ballast / With driver.

Villkor: Measured test weight; specified ballast and driver; not shipping or retail mass.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 15,
  "printedPage": 15,
  "row": "Test conditions / Weights / With ballast / With driver",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "front 2200 kg; rear 3300 kg; total 5500 kg",
  "printedUnit": "kg"
}

Motor och maskindata

Motor och effekt

Fendt Farmer 306 LS Turbomatik · Motor och effekt
UppgiftVärde och utförandeKälla
MotortypD-226-4

Utförande Farmer 306 LS Turbomatik, OECD 812 · engine

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: engine

Kraftuttag

Fendt Farmer 306 LS Turbomatik · Kraftuttag
UppgiftVärde och utförandeKälla
Kraftuttagseffekt47.1 kW

Utförande Farmer 306 LS Turbomatik, OECD 812 · PTO · 2-hour PTO, same point as drawbar recommended speed, PTO 1035

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 47.1 kW kW

Utförande: Farmer 306 LS Turbomatik, OECD 812

Norm: PTO

Mätning: 2-hour PTO, same point as drawbar recommended speed, PTO 1035

Kraftuttagseffekt46.7 kW

Utförande Farmer 306 LS Turbomatik, OECD 812 · PTO · maximum power at standard PTO speed 1000

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 46.7 kW kW

Utförande: Farmer 306 LS Turbomatik, OECD 812

Norm: PTO

Mätning: maximum power at standard PTO speed 1000

Transmission och drivning

Fendt Farmer 306 LS Turbomatik · Transmission och drivning
UppgiftVärde och utförandeKälla
TransmissionEgen synkroniserad växellåda, grupper FS/FL, landsvägsgrupp S och fältgrupp A, två överväxlar

Utförande Farmer 306 LS Turbomatik, OECD 812 · gearbox

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: gearbox

Framåtväxlar14 växlar

Utförande Farmer 306 LS Turbomatik, OECD 812 · tested tractor, without optional creeper and third overdrive

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 14 forward speeds gears

Utförande: Farmer 306 LS Turbomatik, OECD 812

Villkor: tested tractor, without optional creeper and third overdrive

Backväxlar4 växlar

Utförande Farmer 306 LS Turbomatik, OECD 812 · tested tractor

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 4 reverse speeds gears

Utförande: Farmer 306 LS Turbomatik, OECD 812

Villkor: tested tractor

Drivning4WD

Utförande Farmer 306 LS Turbomatik, OECD 812 · axles

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: axles

Mått, vikt och däck

Fendt Farmer 306 LS Turbomatik · Mått, vikt och däck
UppgiftVärde och utförandeKälla
Vikt3 615 kg

Utförande Farmer 306 LS Turbomatik, OECD 812 · drawbar tests, unballasted, without driver

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 3615 kg kg

Utförande: Farmer 306 LS Turbomatik, OECD 812

Mätning: drawbar tests, unballasted, without driver

Vikt3 695 kg

Utförande Farmer 306 LS Turbomatik, OECD 812 · drawbar tests, unballasted, with driver

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 3695 kg kg

Utförande: Farmer 306 LS Turbomatik, OECD 812

Mätning: drawbar tests, unballasted, with driver

Vikt5 420 kg

Utförande Farmer 306 LS Turbomatik, OECD 812 · drawbar tests, ballasted, without driver

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 5420 kg kg

Utförande: Farmer 306 LS Turbomatik, OECD 812

Mätning: drawbar tests, ballasted, without driver

Vikt5 500 kg

Utförande Farmer 306 LS Turbomatik, OECD 812 · drawbar tests, ballasted, with driver

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 5500 kg kg

Utförande: Farmer 306 LS Turbomatik, OECD 812

Mätning: drawbar tests, ballasted, with driver

Hjulbas2 320 mm

Utförande Farmer 306 LS Turbomatik, OECD 812 · wheelbase

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 2320 mm mm

Utförande: Farmer 306 LS Turbomatik, OECD 812

Mätning: wheelbase

Längd3 923 mm

Utförande Farmer 306 LS Turbomatik, OECD 812 · overall length without ballast

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 3923 mm mm

Utförande: Farmer 306 LS Turbomatik, OECD 812

Mätning: overall length without ballast

Längd4 885 mm

Utförande Farmer 306 LS Turbomatik, OECD 812 · overall length with ballast

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 4885 mm mm

Utförande: Farmer 306 LS Turbomatik, OECD 812

Mätning: overall length with ballast

Bredd1 915 mm

Utförande Farmer 306 LS Turbomatik, OECD 812 · overall width without ballast

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 1915 mm mm

Utförande: Farmer 306 LS Turbomatik, OECD 812

Mätning: overall width without ballast

Bredd2 680 mm

Utförande Farmer 306 LS Turbomatik, OECD 812 · overall width with ballast

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 2680 mm mm

Utförande: Farmer 306 LS Turbomatik, OECD 812

Mätning: overall width with ballast

Höjd2 597 mm

Utförande Farmer 306 LS Turbomatik, OECD 812 · to cab roof

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 2597 mm mm

Utförande: Farmer 306 LS Turbomatik, OECD 812

Mätning: to cab roof

Däck

Fendt Farmer 306 LS Turbomatik · Däck
UppgiftVärde och utförandeKälla
Framdäck12.4-24

Utförande Farmer 306 LS Turbomatik, OECD 812 · tested front tyre, diagonal 6 ply

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 12,4-24 size

Utförande: Farmer 306 LS Turbomatik, OECD 812

Villkor: tested front tyre, diagonal 6 ply

Bakdäck16.9 R 34

Utförande Farmer 306 LS Turbomatik, OECD 812 · tested rear tyre, radial 8 ply

Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

Källans värde: 16,9 R 34 size

Utförande: Farmer 306 LS Turbomatik, OECD 812

Villkor: tested rear tyre, radial 8 ply

Service och underhåll

Farmer 306 LS Turbomatik · Service och underhåll
UppgiftVärde och utförandeKälla
Vikt vid servicebromsprov med förareOballasterad: fram 1425 kg, bak 2270 kg, totalt 3695 kg; ballasterad: fram 2200 kg, bak 3300 kg, totalt 5500 kg.

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: Unballasted: front 1425 kg, rear 2270 kg, total 3695 kg; ballasted: front 2200 kg, rear 3300 kg, total 5500 kg kg

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.23 (printed p.23); Braking / Tractor masses during tests with driver.

Villkor: Brake-test mass and ballast conditions; not shipping or retail weight.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 23,
  "printedPage": 23,
  "row": "Braking / Tractor masses during tests with driver",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "without ballast 1425 / 2270 / 3695 kg; with ballast 2200 / 3300 / 5500 kg",
  "printedUnit": "kg"
}
Hastighet före servicebromsprovUtan ballast 31,1 km/h; med ballast 30,7 km/h.
Källa

Originalvärde: Without ballast 31,1 km/h; with ballast 30,7 km/h km/h

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.23 (printed p.23); Braking / Service brake / Speed before application of brakes.

Villkor: The brakes were heated by towing the tractor for 1 km.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 23,
  "printedPage": 23,
  "row": "Braking / Service brake / Speed before application of brakes",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "without ballast 31,1 km/h; with ballast 30,7 km/h",
  "printedUnit": "km/h"
}

Övriga uppgifter

Farmer 306 LS Turbomatik · Övriga uppgifter
UppgiftVärde och utförandeKälla
ModellbeteckningFendt Farmer 306 LS Turbomatik som tryckt
Källa

Originalvärde: Fendt Farmer 306 LS Turbomatik as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.1 (unnumbered front matter); Cover title.

Villkor: No model year or generation stated.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 1,
  "printedPage": null,
  "row": "Cover title",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Agricultural Tractor FENDT FARMER 306 LS TURBOMATIK",
  "printedUnit": "as printed"
}
TillverkareX. Fendt & Co., Maschinen- und Schlepperfabrik, D-8952 Marktoberdorf som tryckt
Källa

Originalvärde: X. Fendt & Co., Maschinen- und Schlepperfabrik, D-8952 Marktoberdorf as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.1 (unnumbered front matter); Manufacturer.

Villkor: Official report cover.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 1,
  "printedPage": null,
  "row": "Manufacturer",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "X. Fendt & Co., Maschinen- und Schlepperfabrik; D-8952 Marktoberdorf",
  "printedUnit": "as printed"
}
DLG-testnummer79-245 som tryckt
Källa

Originalvärde: 79-245 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.3 (printed p.3); Report header.

Villkor: Report identity only; not a model-year designation.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 3,
  "printedPage": 3,
  "row": "Report header",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Test No. 79-245",
  "printedUnit": "as printed"
}
OECD-rapportnummer812 som tryckt
Källa

Originalvärde: 812 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.1 (unnumbered front matter); Cover title block.

Villkor: Report number, not model-year evidence.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 1,
  "printedPage": null,
  "row": "Cover title block",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "O.E.C.D. No. 812",
  "printedUnit": "as printed"
}
Traktorns konstruktionWheel tractor, unit construction, all wheel drive som tryckt
Källa

Originalvärde: Wheel tractor, unit construction, all wheel drive as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Tractor type.

Villkor: Specification of tested specimen.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Tractor type",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "Wheel tractor, unit construction, all wheel drive",
  "printedUnit": "as printed"
}
Testexemplarets fordonsserienummer168.21.0026 som tryckt
Källa

Originalvärde: 168.21.0026 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.4 (printed p.4); Specification of Tractor / Tractor / Serial-No..

Villkor: One tested specimen; no series-start/end or PIN range inferred.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 4,
  "printedPage": 4,
  "row": "Specification of Tractor / Tractor / Serial-No.",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "168.21.0026",
  "printedUnit": "as printed"
}
UndersökningsperiodNovember 1980 till March 1981 som tryckt

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: November 1980 till March 1981 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.2 (unnumbered front matter); Duration of Tests.

Villkor: Report/test dates only; not model year or production span.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 2,
  "printedPage": null,
  "row": "Duration of Tests",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "November 1980 till March 1981",
  "printedUnit": "as printed"
}
OECD-godkännandedatum3 November 1981 som tryckt
Källa

Originalvärde: 3 November 1981 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.2 (unnumbered front matter); Date of Approval.

Villkor: Approval date is not model year.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 2,
  "printedPage": null,
  "row": "Date of Approval",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "3rd November 1981",
  "printedUnit": "as printed"
}
Tryckdatum och DLG-utgåvaNovember 1981; DLG-No. 165 som tryckt
Källa

Originalvärde: November 1981; DLG-No. 165 as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.2 (unnumbered front matter); Printed in the Federal Republic of Germany.

Villkor: Publication date only.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 2,
  "printedPage": null,
  "row": "Printed in the Federal Republic of Germany",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "November 1981; DLG-No. 165",
  "printedUnit": "as printed"
}
Elsystemets spänning och jordning12 Volt, negative earth som tryckt
Källa

Originalvärde: 12 Volt, negative earth as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.5 (printed p.5); Specification of Tractor / Electrical equipment.

Villkor: As specified.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 5,
  "printedPage": 5,
  "row": "Specification of Tractor / Electrical equipment",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "12 Volt, negative earth",
  "printedUnit": "as printed"
}
Generatorbeteckning och strömBOSCH 3-phase alternator G1-14V; 33 A som tryckt
Källa

Originalvärde: BOSCH 3-phase alternator G1-14V; 33 A as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.5 (printed p.5); Specification of Tractor / Electrical equipment.

Villkor: The trailing wattage in the scan is unclear; only the legible designation and current are proposed.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 5,
  "printedPage": 5,
  "row": "Specification of Tractor / Electrical equipment",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "BOSCH 3-phase alternator G1-14V 33A; following power text appears as “27,462 W” but is visually ambiguous and not proposed.",
  "printedUnit": "as printed"
}
Batteri1 lead acid battery; 110 Ah at 20 hours rating som tryckt
Källa

Originalvärde: 1 lead acid battery; 110 Ah at 20 hours rating as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.5 (printed p.5); Specification of Tractor / Electrical equipment.

Villkor: As specified.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 5,
  "printedPage": 5,
  "row": "Specification of Tractor / Electrical equipment",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "1 lead acid battery, 110 Ah at 20 hours rating",
  "printedUnit": "as printed"
}
Tillåten vertikal belastning på släpvagnskroken1500 kg
Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: No separate measurement standard stated for this specification row; official report states testing followed the O.E.C.D. Standard Code.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.10 (printed p.10); Specification of Tractor / Pull attachment / Trailer hitch.

Villkor: Trailer hitch specification; not rear lift capacity.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 10,
  "printedPage": 10,
  "row": "Specification of Tractor / Pull attachment / Trailer hitch",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "permissible vertical load 1500 kg",
  "printedUnit": "kg"
}
Fem timmars dragstångsprov med ballastVäxel 1 S FS; hastighet 6,85 km/h; dragstångseffekt 30,5 kW; dragkraft 1604 daN; motorvarvtal 2250 rev/min; hjulslirning 2,0%

Mätvärdet avser provutförandet och villkoren i den angivna rapporten. · Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Originalvärde: Gear 1 S FS; 6,85 km/h; 30,5 kW; 1604 daN; engine 2250 rev/min; wheel slip 2,0% as printed

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.20 (printed p.20); Drawbar performance / FIVE-HOUR-TEST at 75% of pull at maximum power in 1st S FS gear.

Villkor: Drawbar test; report explicitly states 75% of pull at maximum power in 1st S FS gear; conditions are not a rated engine output.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 20,
  "printedPage": 20,
  "row": "Drawbar performance / FIVE-HOUR-TEST at 75% of pull at maximum power in 1st S FS gear",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "1 S FS | 6,85 | 30,5 | 1604 | 2250 | 2,0",
  "printedUnit": "as printed"
}
Oljeförbrukning under tio timmars dragstångsprov19 g/h

Mätvärdet avser provutförandet och villkoren i den angivna rapporten.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.20 (printed p.20); Drawbar performance / Total oil consumption during ten hours duration of tests (iii) and (iv).

Villkor: Applies to the two five-hour tests (iii) and (iv) on the report page.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 20,
  "printedPage": 20,
  "row": "Drawbar performance / Total oil consumption during ten hours duration of tests (iii) and (iv)",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "19 g/h",
  "printedUnit": "g/h"
}
Vändradie i vändutrymme med bromsar – vänster och högerVänster 4,81 m; höger 4,75 m; framaxeldriften urkopplad och angivna däckstorlekar och spårvidder enligt källsidan.
Källa

Originalvärde: Left 4,81 m; right 4,75 m m

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.22 (printed p.22); Turning space and turning circle / Radius of turning space / With brakes.

Villkor: Front axle drive disengaged; stated tire sizes and tracks appear on the same page.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 22,
  "printedPage": 22,
  "row": "Turning space and turning circle / Radius of turning space / With brakes",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "left-hand 4,81 m; right-hand 4,75 m",
  "printedUnit": "m"
}
Vändradie i vändutrymme utan bromsar – vänster och högerVänster 5,79 m; höger 5,49 m; framaxeldriften urkopplad och angivna däckstorlekar och spårvidder enligt källsidan.
Källa

Originalvärde: Left 5,79 m; right 5,49 m m

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.22 (printed p.22); Turning space and turning circle / Radius of turning space / Without brakes.

Villkor: Front axle drive disengaged; stated tire sizes and tracks appear on the same page.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 22,
  "printedPage": 22,
  "row": "Turning space and turning circle / Radius of turning space / Without brakes",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "left-hand 5,79 m; right-hand 5,49 m",
  "printedUnit": "m"
}
Vändradie i vändcirkel med bromsar – vänster och högerVänster 4,47 m; höger 4,36 m; framaxeldriften urkopplad.
Källa

Originalvärde: Left 4,47 m; right 4,36 m m

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.22 (printed p.22); Turning space and turning circle / Radius of turning circle / With brakes.

Villkor: Front axle drive disengaged.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 22,
  "printedPage": 22,
  "row": "Turning space and turning circle / Radius of turning circle / With brakes",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "left-hand 4,47 m; right-hand 4,36 m",
  "printedUnit": "m"
}
Vändradie i vändcirkel utan bromsar – vänster och högerVänster 5,45 m; höger 5,15 m; framaxeldriften urkopplad.
Källa

Originalvärde: Left 5,45 m; right 5,15 m m

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.22 (printed p.22); Turning space and turning circle / Radius of turning circle / Without brakes.

Villkor: Front axle drive disengaged.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 22,
  "printedPage": 22,
  "row": "Turning space and turning circle / Radius of turning circle / Without brakes",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "left-hand 5,45 m; right-hand 5,15 m",
  "printedUnit": "m"
}
Bullernivå utanför traktorn88,0 dB(A)

Mätvärdet gäller den angivna provuppställningen och villkoren; det överförs inte automatiskt till alla traktorer.

Källa

Utförande: FENDT FARMER 306 LS TURBOMATIK; DLG Test No. 79-245; OECD No. 812; tested specimen vehicle serial no. 168.21.0026. No generation, model year, production span, series-start or PIN range is stated.

Standard och villkor: O.E.C.D. Standard Code report; exact report test section, setup and row condition are retained. No unit conversion performed.

Marknad: German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.

Källperiod: Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Underlag: DLG Test No. 79-245 / OECD No. 812, physical PDF p.24 (printed p.24); Measurement of external noise level / Results of test.

Villkor: Measured 30 January 1981 on concrete with Brüel and Kjær model 2209 sound-level meter.

Publicerad: Printed November 1981; DLG No. 165; OECD No. 812 approval dated 3 November 1981.

Läst: 2026-10-08

Källcellens text och dokumentlocator
{
  "physicalPdfPage": 24,
  "printedPage": 24,
  "row": "Measurement of external noise level / Results of test",
  "modelColumn": "FENDT FARMER 306 LS TURBOMATIK; tested specimen vehicle serial no. 168.21.0026.",
  "printedCellValue": "2nd Overdrive; travelling speed before acceleration 23,2 km/h; sound level 88,0 dB(A)",
  "printedUnit": "dB(A)"
}

Oljemängder och oljetyp

Oljevolymer, oljespecifikationer och serviceintervall.

Angivna fyllnadsmängder och serviceuppgifter enligt respektive källa
UppgiftVärde och utförandeKälla
Motorolja9,5 l Farmer 306 LS Turbomatik, OECD 812 · engine lubrication
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 5. Oil capacity 9,5 l. Olja och patron byts var 200:e timme. Föreskriven kvalitet MIL-L-46 152 eller MIL-L-2104 C. Vid provet användes Aral Super Elastic SAE 10W i motorn.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: engine lubrication

Transmissionsolja32,5 l Farmer 306 LS Turbomatik, OECD 812 · gearbox
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 7. Gear box 32,5 l, SAE 80. Vätskekopplingen 5,8 l, bakre slutväxlar 3,0 l each, framaxeldifferential 4,8 l och främre slutväxlar 0,5 l each ingår inte. Vid provet användes Mobilube HD 90 SAE 90 i transmissionen, vilket skiljer sig från den föreskrivna SAE 80.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: gearbox

Hydraulik20 l Farmer 306 LS Turbomatik, OECD 812 · separate hydraulic tank, common with lift and steering
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 9. Separate hydraulic tank with 20 l capacity. Egen behållare, inte växellådans 32,5 l. Styrningen delar oljebehållare med kraftlyften.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: separate hydraulic tank, common with lift and steering

Framaxel4,8 l Farmer 306 LS Turbomatik, OECD 812 · front differential housing
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 7. Front axle differential 4,8 l, SAE 90. Främre slutväxlar 0,5 l each ingår inte. Kvalitet MIL-L-2105 B. Vid provet användes Mobilube HD 90 SAE 90.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: front differential housing

Oljespecifikation · engineMIL-L-46 152 eller MIL-L-2104 C Farmer 306 LS Turbomatik, OECD 812 · engine
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 5. Specified oil quality MIL-L-46 152 or MIL-L-2104 C. Viskositet: SAE 40 i tropik, SAE 30 över +5 °C, SAE 20W/20 från -10 till +10 °C, SAE 10W under -5 °C.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: engine

Oljespecifikation · gearboxMIL-L-2105 SAE 80 Farmer 306 LS Turbomatik, OECD 812 · gearbox
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 6 och 7. Gear box MIL-L-2105, viskositet SAE 80.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: gearbox

Oljespecifikation · front differential and final drivesMIL-L-2105 B SAE 90 Farmer 306 LS Turbomatik, OECD 812 · front differential and final drives
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 6 och 7. Final drives and front axle differential MIL-L-2105 B, SAE 90.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: front differential and final drives

Oljespecifikation · hydraulic tankSAE 20W/20, MIL-L-2104C eller MIL-L-46 152 Farmer 306 LS Turbomatik, OECD 812 · hydraulic tank
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 9. Hydraulbehållaren: engine oil SAE 20W/20 (tropics SAE 30), MIL-L-2104C or MIL-L-46 152.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: hydraulic tank

Oljespecifikation · fluid couplingSAE 10W Farmer 306 LS Turbomatik, OECD 812 · fluid coupling
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 7. Fluid clutch 5,8 l, SAE 10W. Ingen MIL-kvalitet är tryckt för vätskekopplingen. Byte 5000 h.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: fluid coupling

Serviceintervallmotorolja 200 h; motoroljefilter 200 h; transmissionsolja 1 000 h; hydraulolja 1 000 h; hydraulikfilter 1 000 h Farmer 306 LS Turbomatik, OECD 812 · engine, gearbox and hydraulic tank
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 5: olja och patron var 200:e timme. Sida 6: other gears all 1000 operating hours or once a year. Växellådan ingår i de växlarna. Vätskekopplingens 5000 h ingår inte. Sida 9: hydrauloljan byts efter 1000 h eller en gång per år, och hydraulfiltrets patron byts efter 1000 h eller en gång per år. Sida 11: styrningens oljefilter har samma 1000 h.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: engine, gearbox and hydraulic tank

Bränsle och kylvätska

Angivna volymer enligt respektive källa
UppgiftVärde och utförandeKälla
Kylvätska13 l Farmer 306 LS Turbomatik, OECD 812 · cooling
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 5. Water capacity 13 l.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: cooling

Bränsletank108 l Farmer 306 LS Turbomatik, OECD 812 · fuel tank
Källa

OECD Report No. 812, DLG Test No. 79-245 — Fendt Farmer 306 LS Turbomatik

Utgivare: Deutsche Landwirtschafts-Gesellschaft e. V.

DLG Test No. 79-245, OECD No. 812, Fendt Farmer 306 LS Turbomatik. Kraftuttag provat 17 december 1980 i Groß-Umstadt. Sida 4. Capacity of fuel tank 108 l.

Utförande: Farmer 306 LS Turbomatik, OECD 812

System: fuel tank

Jämför modelluppgifter

Jämför publicerade faktarader och deras källvillkor mellan modellprofiler.

Välj en modell för att se de faktarader som har källgranskats.

Källor

Öppna källposten för publikation, variant, period och metod.

Om underlaget
Modellkod
Farmer 306 LS Turbomatik
Serie
Farmer
Generation
Ingen generationsbeteckning angiven i profilen
Marknad
German DLG/OECD test-report context; sales market, Swedish availability and Swedish homologation are not established.
Källperiod
Tests/investigations November 1980–March 1981; DLG/OECD approval 3 November 1981; printed November 1981 (DLG No. 165). These are test/report dates only, not model year, production span, generation, series boundary or PIN evidence.

Avgränsat källunderlag · status gap · omfattning comparisonFacts.

En fullständig granskning av hela modellguiden är inte dokumenterad.