John Deere · 55-serien

John Deere 4555

Läs publicerade uppgifter om motor, effekt och moment, transmission, hydraulik och lyft, kraftuttag, mått och vikt.

Tekniska data Jämför modeller

Bild saknas

En modellbild med verifierad källa och licens finns inte tillgänglig.

Kraft, fart och format.

John Deere 4555

Alla tekniska data

Motor

Testmotorns modell och grundspecifikation6 cylindrar

John Deere 4555 test specimen, PowerShift with mechanical front wheel drive… · OECD Standard

Fakta

Tekniska data

Publicerade uppgifter om motor, effekt och moment, transmission, hydraulik och lyft, kraftuttag, mått och vikt.

Motor och effekt

4555 · Motor och effekt
Uppgift	Värde och utförande	Källa
Testmotorns modell och grundspecifikation	John Deere 6076TRW07, diesel, turbocharged; 6 cylinders in-line/vertical; bore × stroke 115.8 × 120.7 mm (4.56 × 4.75 in); capacity 7634 ml (466 cu in); compression ratio 16.0:1; overhead valves; wet, replaceable liners. model / cylinder count / mm (in) / ml (cu in) / ratio John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. · Engine/test-specification record only; does not imply every 4555 market or serial range.	Källa Originalrubrik Testmotorns modell och grundspecifikation Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.4 (printed p.1); ENGINE > Model, Type, Cylinders, Bore/stroke, Capacity, Compression Ratio, Arrangement of valves, Cylinder liners Villkor Engine/test-specification record only; does not imply every 4555 market or serial range. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Turboaggregat och angivet laddtryck	Air Research / RE29308, exhaust-gas driven; pressure 100–125 kPa (15–18 psi) at rated speed and load. model / kPa (psi) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. · Pressure is given at the report’s stated rated-speed/load condition; it is not a universal boost reading.	Källa Originalrubrik Turboaggregat och angivet laddtryck Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.4 (printed p.1); ENGINE > Super Charging, Make/Model/Type and Pressure rows Villkor Pressure is given at the report’s stated rated-speed/load condition; it is not a universal boost reading. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Regulator och motorvarvtal	Nippodenso/RSV200 mechanical governor; governed engine speed range 800–2400 rev/min; rated engine speed 2200 rev/min; high-idle range 2375 ± 25 rev/min. rev/min John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. · These are the specification cells for the DLG-tested specimen.	Källa Originalrubrik Regulator och motorvarvtal Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.5 (printed p.2); Governor > Make/Model/Type, Governed engine speed range, Rated engine speed, High-idle speed range Villkor These are the specification cells for the DLG-tested specimen. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Kylsystemets utförande och kapacitet	Liquid cooling; centrifugal pump; belt-driven variable-speed fan with 8 blades and 660 mm (26.0 in) diameter; coolant-system capacity 30.3 L (32 qt); 2 thermostats and variable-speed fan; superpressure system 69 kPa (10 psi). L (qt) / mm (in) / kPa (psi) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. · The original calls this coolant-system capacity; it is not a test-derived operating-temperature claim.	Källa Originalrubrik Kylsystemets utförande och kapacitet Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.5 (printed p.2); Cooling System rows Villkor The original calls this coolant-system capacity; it is not a test-derived operating-temperature claim. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Ekvivalent motorvridmoment vid nominellt varvtal	Section 1.5 Part Loads, governor hand lever set for maximum power at standard PTO speed; Equivalent engine torque at rated engine speed: 508 Nm at 2200 rev/min. Nm at rev/min John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Rapportens label är Equivalent engine torque; ska inte presenteras som en oberoende motormomentkurva.	Källa Originalrubrik Ekvivalent motorvridmoment vid nominellt varvtal Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag Section 1.5 Part Loads; Equivalent engine torque > at rated engine speed row Villkor Rapportens label är Equivalent engine torque; ska inte presenteras som en oberoende motormomentkurva. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Ekvivalent motorvridmoment vid maximal effekt	Section 1.5 Part Loads, governor hand lever set for maximum power at standard PTO speed; Equivalent engine torque at maximum power: 609 Nm at 1900 rev/min. Nm at rev/min John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Rapportens label är Equivalent engine torque; ska inte presenteras som en oberoende motormomentkurva.	Källa Originalrubrik Ekvivalent motorvridmoment vid maximal effekt Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag Section 1.5 Part Loads; Equivalent engine torque > at maximum power row Villkor Rapportens label är Equivalent engine torque; ska inte presenteras som en oberoende motormomentkurva. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Ekvivalent motorvridmoment vid maximalt moment	Section 1.5 Part Loads, governor hand lever set for maximum power at standard PTO speed; Equivalent engine torque at maximum torque: 672 Nm at 1600 rev/min. Nm at rev/min John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Rapportens label är Equivalent engine torque; ska inte presenteras som en oberoende motormomentkurva.	Källa Originalrubrik Ekvivalent motorvridmoment vid maximalt moment Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag Section 1.5 Part Loads; Equivalent engine torque > at maximum torque row Villkor Rapportens label är Equivalent engine torque; ska inte presenteras som en oberoende motormomentkurva. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost

Transmission

John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification.

4555 · Transmission
Uppgift	Värde och utförande	Källa
Färdkoppling	John Deere multiple-plate, oil-cooled travel clutch; 3, 4, or 7 plates depending on gear; plate diameter 279.4 mm (11.0 in); hydraulically actuated by foot pedal. plate count / mm (in) / operation Plate count varies by gear as the report states; do not reduce this to a single fixed plate count.	Källa Originalrubrik Färdkoppling Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.6 (printed p.3); TRANSMISSION > Clutch (travel) rows Villkor Plate count varies by gear as the report states; do not reduce this to a single fixed plate count. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Växellåda och antal växlar	John Deere full PowerShift; planetary arrangement (one input planetary gearset, one 2-speed planetary gearset, two compound planetary gearsets) with multiple wet-disc clutches and brakes; 15 forward and 4 reverse gears, controlled by one hand lever. transmission type / gears This is the tested PowerShift configuration only; it is not the separate Quad-Range test/model configuration.	Källa Originalrubrik Växellåda och antal växlar Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.6 (printed p.3); TRANSMISSION > Gear Box > Make/Model/Type, Arrangement and Number of gears rows Villkor This is the tested PowerShift configuration only; it is not the separate Quad-Range test/model configuration. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost

Hydraulik och lyft

4555 · Hydraulik och lyft
Uppgift	Värde och utförande	Källa
Bränsleinsprutningens pump- och injektordata	Injection pump Nippodenso/RE36654, in-line; injectors Nippodenso/RE30084, 21 mm; injection pressure 29.0 MPa (4200 psi); timing 27 degrees before TDC; pump production setting flow 28.4 ± 1.3 kg/h at rated engine speed and 62.6 ± 2.8 lb/h at full load. component / MPa (psi) / degrees / kg/h / lb/h John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. · Pump-flow cells retain the report’s separate original units and conditions; no conversion or adjustment is applied.	Källa Originalrubrik Bränsleinsprutningens pump- och injektordata Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.5 (printed p.2); Injection Pump, Production setting of pump / Flow Rate, Injectors, Injection pressure and Timing rows Villkor Pump-flow cells retain the report’s separate original units and conditions; no conversion or adjustment is applied. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Hydraullyftens systemdata	John Deere hydraulic lift with variable mix of draft and position control, lower-link sensing, adjustable drop speed and closed center; one internal single-acting cylinder plus one or two optional external single-acting cylinders; relief setting 17.5 ± 0.30 MPa (2535 ± 45 psi), cylinder safety valve opening 20.7 MPa (3000 psi); radial-piston variable-delivery constant-pressure pump, direct drive; reservoir in transmission housing; 3 pairs of rear ISO couplings (4th optional); Category 3 per ISO 730/1-1977 with quick-coupler adapter. MPa (psi) / cylinder and coupling configuration John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. · Optional external cylinders and fourth coupling pair are expressly optional; pressure cells belong to the lift-system spec, not hydraulic test output.	Källa Originalrubrik Hydraullyftens systemdata Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.9 (printed p.6); POWER LIFT and THREE POINT LINKAGE sections, corresponding cells Villkor Optional external cylinders and fourth coupling pair are expressly optional; pressure cells belong to the lift-system spec, not hydraulic test output. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Hydraulpump: hålltryck med stillastående pump	Sustained pressure with pump stalled: 17.58 MPa (2550 psi). MPa (psi) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · DLG-testresultat för provexemplaret, inte ersättning för systemets separata 17.5 ± 0.30 MPa relief-inställning i faktat jd_4555_dlg_power_lift_system.	Källa Originalrubrik Hydraulpump: hålltryck med stillastående pump Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag 2.1 Hydraulic Power Test – Hydraulic Pump Performance; Sustained pressure with pump stalled Villkor DLG-testresultat för provexemplaret, inte ersättning för systemets separata 17.5 ± 0.30 MPa relief-inställning i faktat jd_4555_dlg_power_lift_system. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Hydraulpump: flöde vid minimitryck och nominellt motorvarvtal	Pump delivery at minimum pressure and rated engine speed: 124.2 L/min (32.8 gpm). L/min (gpm) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Provresultat med rapportens villkor; inte generell levererad arbetskapacitet i alla tryck-/varvtalslägen.	Källa Originalrubrik Hydraulpump: flöde vid minimitryck och nominellt motorvarvtal Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag 2.1 Hydraulic Power Test – Hydraulic Pump Performance; Pump delivery at minimum pressure & rated engine speed cell Villkor Provresultat med rapportens villkor; inte generell levererad arbetskapacitet i alla tryck-/varvtalslägen. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Hydraulikprov vid 90 procent av överströmningsventilens inställning	Vid 90% of relief valve setting: flöde 24.6 L/min (6.5 gpm), tryck 15.86 MPa (2300 psi), effekt 6.5 kW (8.7 hp). L/min (gpm); MPa (psi); kW (hp) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Rapportens hydraulikprovpunkt; inte maxkapacitet eller systemets inställda relieftryck.	Källa Originalrubrik Hydraulikprov vid 90 procent av överströmningsventilens inställning Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag 2.1 Hydraulic Power Test; raden At 90% of relief valve setting, flow/pressure/power cells Villkor Rapportens hydraulikprovpunkt; inte maxkapacitet eller systemets inställda relieftryck. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Hydraulikprov vid maximal hydraulisk effekt	At maximum hydraulic power: flöde 120.0 L/min (31.7 gpm), tryck 12.07 MPa (1750 psi), effekt 24.1 kW (32.4 hp). L/min (gpm); MPa (psi); kW (hp) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Rapportens hydraulikprovpunkt; inte ett fristående maxflöde vid systemets relieftryck.	Källa Originalrubrik Hydraulikprov vid maximal hydraulisk effekt Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag 2.1 Hydraulic Power Test; raden At maximum hydraulic power, flow/pressure/power cells Villkor Rapportens hydraulikprovpunkt; inte ett fristående maxflöde vid systemets relieftryck. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Hydraulikprov: mätuttag och vätsketemperatur	Mätpunkter: två hydrauluttag kombinerade. Hydraulvätskans temperatur: 66 °C (152 °F) i oljereservoaren och 64 °C (146 °F) vid flödesmätaren. mätuppställning; °C (°F) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Provuppställning och temperatur under testet, inte driftstemperaturgräns.	Källa Originalrubrik Hydraulikprov: mätuttag och vätsketemperatur Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag 2.1 Hydraulic Power Test; Tapping point(s) and Hydraulic fluid temperature cells Villkor Provuppställning och temperatur under testet, inte driftstemperaturgräns. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Lyftprov 2.2: maximal korrigerad kraft vid dragpunkterna	2.2 Power Lift Test, Maximum corrected force through full range, Hitch Points: 27.3 kN (6129 lbf), corresponding pressure 12066 kPa (1750 psi). kN (lbf), kPa (psi) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Sidan namnger inte assistcylinderns dimension. Den får inte beskrivas som test utan assistcylinder eller som modellens generella lyftkapacitet.	Källa Originalrubrik Lyftprov 2.2: maximal korrigerad kraft vid dragpunkterna Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag 2.2 Power Lift Test; Maximum corrected force through full range row, Hitch Points column; corresponding pressure row Villkor Sidan namnger inte assistcylinderns dimension. Den får inte beskrivas som test utan assistcylinder eller som modellens generella lyftkapacitet. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Lyftprov 2.2: maximal korrigerad kraft vid ramen	2.2 Power Lift Test, Maximum corrected force through full range, Frame: 25.9 kN (5821 lbf), corresponding pressure 12066 kPa (1750 psi). kN (lbf), kPa (psi) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Sidan namnger inte assistcylinderns dimension. Den får inte beskrivas som test utan assistcylinder eller som modellens generella lyftkapacitet.	Källa Originalrubrik Lyftprov 2.2: maximal korrigerad kraft vid ramen Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag 2.2 Power Lift Test; Maximum corrected force through full range row, Frame column; corresponding pressure row Villkor Sidan namnger inte assistcylinderns dimension. Den får inte beskrivas som test utan assistcylinder eller som modellens generella lyftkapacitet. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Trepunktslyftprov med 44 mm assistcylinder: dragpunktskraft	Three Point Lift Performance with 44 mm lift assist cylinder; Maximum corrected force through full range at Hitch Points: 30.9 kN (6957 lbf), corresponding pressure 12066 kPa (1750 psi). kN (lbf), kPa (psi) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Testvärde för uttryckligen angiven assistcylinder, inte generell lyftkapacitet.	Källa Originalrubrik Trepunktslyftprov med 44 mm assistcylinder: dragpunktskraft Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag Three Point Lift Performance (with 44 mm lift assist cylinder); Maximum corrected force through full range, Hitch Points column and Corresponding pressure Villkor Testvärde för uttryckligen angiven assistcylinder, inte generell lyftkapacitet. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Trepunktslyftprov med 44 mm assistcylinder: ramkraft	Three Point Lift Performance with 44 mm lift assist cylinder; Maximum corrected force through full range at Frame: 29.4 kN (6614 lbf), corresponding pressure 12066 kPa (1750 psi). kN (lbf), kPa (psi) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Testvärde för uttryckligen angiven assistcylinder, inte generell lyftkapacitet.	Källa Originalrubrik Trepunktslyftprov med 44 mm assistcylinder: ramkraft Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag Three Point Lift Performance (with 44 mm lift assist cylinder); Maximum corrected force through full range, Frame column and Corresponding pressure Villkor Testvärde för uttryckligen angiven assistcylinder, inte generell lyftkapacitet. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Trepunktslyftprov med 55 mm assistcylinder: dragpunktskraft	Three Point Lift Performance with 55 mm lift assist cylinder; Maximum corrected force through full range at Hitch Points: 33.3 kN (7479 lbf), corresponding pressure 12066 kPa (1750 psi). kN (lbf), kPa (psi) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Testvärde för uttryckligen angiven assistcylinder, inte generell lyftkapacitet.	Källa Originalrubrik Trepunktslyftprov med 55 mm assistcylinder: dragpunktskraft Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag Three Point Lift Performance (with 55 mm lift assist cylinder); Maximum corrected force through full range, Hitch Points column and Corresponding pressure Villkor Testvärde för uttryckligen angiven assistcylinder, inte generell lyftkapacitet. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Trepunktslyftprov med 55 mm assistcylinder: ramkraft	Three Point Lift Performance with 55 mm lift assist cylinder; Maximum corrected force through full range at Frame: 31.4 kN (7057 lbf), corresponding pressure 12066 kPa (1750 psi). kN (lbf), kPa (psi) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Testvärde för uttryckligen angiven assistcylinder, inte generell lyftkapacitet.	Källa Originalrubrik Trepunktslyftprov med 55 mm assistcylinder: ramkraft Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag Three Point Lift Performance (with 55 mm lift assist cylinder); Maximum corrected force through full range, Frame column and Corresponding pressure Villkor Testvärde för uttryckligen angiven assistcylinder, inte generell lyftkapacitet. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost

Kraftuttag

4555 · Kraftuttag
Uppgift	Värde och utförande	Källa
Kraftuttagets typ och standardutförande	Independent rear PTO; hydraulically actuated multi-plate wet clutch operated by hand lever, independent of main-drive clutch; one shaft; standard 1000 rev/min, at 998 rev/min PTO speed when engine is at rated 2200 rev/min; 44.5 mm (1.75 in), 20 splines, ISO 500/1979; clockwise viewed from shaft end. rev/min / mm (in) / spline count John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. · Keep report wording and test specimen scope; not all PTO variants are established.	Källa Originalrubrik Kraftuttagets typ och standardutförande Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.8 (printed p.5); POWER-TAKE-OFF > Main Power-Take-Off and Standard PTO 1000 rev/min rows Villkor Keep report wording and test specimen scope; not all PTO variants are established. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Två timmars maximal kraftuttagsprovning	Main PTO at standard 1000 rev/min setting; maximum-power 2-hour test: 121.15 kW (162.47 hp) at engine 1900 rev/min and PTO 862 rev/min; fuel 32.99 L/h (8.72 gal/h), 27.33 kg/h (60.25 lb/h), specific fuel 0.226 kg/kWh (0.371 lb/hp·h). kW (hp), rev/min, L/h (gal/h), kg/h (lb/h), kg/kWh (lb/hp·h) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. · This is measured PTO output, not rated crankshaft engine power; preserve the report’s original value/unit pairs and 2-hour condition.	Källa Originalrubrik Två timmars maximal kraftuttagsprovning Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.16 (printed p.13); COMPULSORY TESTS > (1) Main Power Take-Off Performance (1000 rev/min) > 1.1 Maximum Power—2 hour test row Villkor This is measured PTO output, not rated crankshaft engine power; preserve the report’s original value/unit pairs and 2-hour condition. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Kraftuttagsprovning vid nominellt motorvarvtal	Main PTO at standard 1000 rev/min setting; 1-hour power-at-rated-engine-speed row: 116.99 kW (156.89 hp) at engine 2200 rev/min and PTO 998 rev/min; fuel 33.83 L/h (8.94 gal/h), 28.02 kg/h (61.78 lb/h), specific fuel 0.240 kg/kWh (0.394 lb/hp·h). kW (hp), rev/min, L/h (gal/h), kg/h (lb/h), kg/kWh (lb/hp·h) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. · This is measured PTO output for a named 1-hour test row; not a generic or crankshaft rated-engine-power figure.	Källa Originalrubrik Kraftuttagsprovning vid nominellt motorvarvtal Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.16 (printed p.13); COMPULSORY TESTS > (1) Main Power Take-Off Performance > 1.2 Power at rated engine speed (1 hour) row Villkor This is measured PTO output for a named 1-hour test row; not a generic or crankshaft rated-engine-power figure. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Kraftuttagsprov, 85 procent av referensmomentet	Section 1.4, governor hand lever set for maximum power at rated engine speed; 85% of torque obtained in row (i): PTO power 101.14 kW (135.63 hp), engine 2242 rev/min, PTO 1017 rev/min, fuel 30.23 L/h (7.99 gal/h) and 25.04 kg/h (55.20 lb/h), specific fuel 0.248 kg/kW·h (0.407 lb/hp·h), specific energy 3.35 kW·h/L (16.98 hp·h/gal). kW (hp); rev/min; L/h (gal/h); kg/h (lb/h); kg/kW·h (lb/hp·h); kW·h/L (hp·h/gal) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Mätvärde i särskild PTO-provsektion och angivet reglagevillkor, inte generell motorprestanda. Kraften är PTO-effekt, inte vevaxeleffekt.	Källa Originalrubrik Kraftuttagsprov, 85 procent av referensmomentet Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag COMPULSORY TESTS > (1) Main Power Take-Off Performance (1000 rev/min) > 1.4 Part Loads; row ii Villkor Mätvärde i särskild PTO-provsektion och angivet reglagevillkor, inte generell motorprestanda. Kraften är PTO-effekt, inte vevaxeleffekt. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Kraftuttagsprov, 75 procent av referensmomentet	Section 1.4, governor hand lever set for maximum power at rated engine speed; 75% of torque defined in row (ii): PTO power 77.32 kW (103.69 hp), engine 2276 rev/min, PTO 1033 rev/min, fuel 24.97 L/h (6.60 gal/h) and 20.68 kg/h (45.60 lb/h), specific fuel 0.268 kg/kW·h (0.440 lb/hp·h), specific energy 3.10 kW·h/L (15.72 hp·h/gal). kW (hp); rev/min; L/h (gal/h); kg/h (lb/h); kg/kW·h (lb/hp·h); kW·h/L (hp·h/gal) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Mätvärde i särskild PTO-provsektion och angivet reglagevillkor, inte generell motorprestanda. Kraften är PTO-effekt, inte vevaxeleffekt.	Källa Originalrubrik Kraftuttagsprov, 75 procent av referensmomentet Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag COMPULSORY TESTS > (1) Main Power Take-Off Performance (1000 rev/min) > 1.4 Part Loads; row iii Villkor Mätvärde i särskild PTO-provsektion och angivet reglagevillkor, inte generell motorprestanda. Kraften är PTO-effekt, inte vevaxeleffekt. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Kraftuttagsprov, 50 procent av referensmomentet	Section 1.4, governor hand lever set for maximum power at rated engine speed; 50% of torque defined in row (ii): PTO power 52.61 kW (70.56 hp), engine 2325 rev/min, PTO 1055 rev/min, fuel 19.88 L/h (5.25 gal/h) and 16.47 kg/h (36.30 lb/h), specific fuel 0.313 kg/kW·h (0.514 lb/hp·h), specific energy 2.65 kW·h/L (13.43 hp·h/gal). kW (hp); rev/min; L/h (gal/h); kg/h (lb/h); kg/kW·h (lb/hp·h); kW·h/L (hp·h/gal) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Mätvärde i särskild PTO-provsektion och angivet reglagevillkor, inte generell motorprestanda. Kraften är PTO-effekt, inte vevaxeleffekt.	Källa Originalrubrik Kraftuttagsprov, 50 procent av referensmomentet Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag COMPULSORY TESTS > (1) Main Power Take-Off Performance (1000 rev/min) > 1.4 Part Loads; row iv Villkor Mätvärde i särskild PTO-provsektion och angivet reglagevillkor, inte generell motorprestanda. Kraften är PTO-effekt, inte vevaxeleffekt. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Kraftuttagsprov, 25 procent av referensmomentet	Section 1.4, governor hand lever set for maximum power at rated engine speed; 25% of torque defined in row (ii): PTO power 26.51 kW (35.55 hp), engine 2358 rev/min, PTO 1070 rev/min, fuel 14.46 L/h (3.82 gal/h) and 11.97 kg/h (26.40 lb/h), specific fuel 0.452 kg/kW·h (0.743 lb/hp·h), specific energy 1.83 kW·h/L (9.31 hp·h/gal). kW (hp); rev/min; L/h (gal/h); kg/h (lb/h); kg/kW·h (lb/hp·h); kW·h/L (hp·h/gal) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Mätvärde i särskild PTO-provsektion och angivet reglagevillkor, inte generell motorprestanda. Kraften är PTO-effekt, inte vevaxeleffekt.	Källa Originalrubrik Kraftuttagsprov, 25 procent av referensmomentet Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag COMPULSORY TESTS > (1) Main Power Take-Off Performance (1000 rev/min) > 1.4 Part Loads; row v Villkor Mätvärde i särskild PTO-provsektion och angivet reglagevillkor, inte generell motorprestanda. Kraften är PTO-effekt, inte vevaxeleffekt. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost

Mått och vikt

4555 · Mått och vikt
Uppgift	Värde och utförande	Källa
Mått under test	Overall length 5461 mm (215.0 in); width minimum 2758 mm (108.6 in), maximum 2997 mm (118.0 in); height to cab top 3099 mm (122.0 in), to exhaust top 3226 mm (127.0 in); unballasted ground clearance 394 mm (15.5 in), limited by hitch sway blocks. mm (in) John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. · Report/test measurements; preserve minimum/maximum width and the stated clearance-limiting part.	Källa Originalrubrik Mått under test Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.14 (printed p.11); TEST CONDITIONS > Overall dimensions rows Villkor Report/test measurements; preserve minimum/maximum width and the stated clearance-limiting part. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Massa och ballast för testkonfigurationen	With cab and full fuel tank, unballasted (front/rear/total): 2898/5155/8053 kg (6390/11365/17755 lb) without driver; 2898/5230/8128 kg (6390/11530/17920 lb) with driver. Ballasted: 3590/6278/9868 kg (7915/13840/21755 lb) without driver; 3590/6353/9943 kg (7915/14005/21920 lb) with driver. Ballast table lists rear weights, dual-rear weights, front frame, added weights and test equipment. kg (lb), front/rear/total John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. · These are test-configuration masses, not a universal curb, operating, shipping, or legal axle-load rating. Driver inclusion and ballast condition must remain visible.	Källa Originalrubrik Massa och ballast för testkonfigurationen Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.14 (printed p.11); TEST CONDITIONS > Tractor Mass (with cab, full fuel tank) and Ballast tables Villkor These are test-configuration masses, not a universal curb, operating, shipping, or legal axle-load rating. Driver inclusion and ballast condition must remain visible. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Ballastprov: bakvikter	Bakvikter: antal 2; totalmassa 454 kg (1000 lb); vatten: none. antal; kg (lb), total John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Provradens ballastkomponent, inte standardutförande. Rapporten anger vatten none för denna rad.	Källa Originalrubrik Ballastprov: bakvikter Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag TEST CONDITIONS > Ballast, raden Rear; kolumner Number of weights, Mass (total), Water Villkor Provradens ballastkomponent, inte standardutförande. Rapporten anger vatten none för denna rad. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Ballastprov: bakdubbelhjulsvikter	Duals (rear): antal 2; totalmassa 776 kg (1710 lb); vattenkolumnen är tom. antal; kg (lb), total John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Vattenfältet är blankt och ska inte tolkas som none eller noll. Provkonfiguration, inte standardutförande.	Källa Originalrubrik Ballastprov: bakdubbelhjulsvikter Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag TEST CONDITIONS > Ballast, raden Duals (rear), antal-, mass- och vattenkolumner Villkor Vattenfältet är blankt och ska inte tolkas som none eller noll. Provkonfiguration, inte standardutförande. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Ballastprov: främre ram	Additional front frame: antal 1; totalmassa 45 kg (100 lb); vattenkolumnen är tom. antal; kg (lb), total John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Vattenfältet är blankt; ingen vattenmängd härleds. Provkonfiguration, inte standardutförande.	Källa Originalrubrik Ballastprov: främre ram Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag TEST CONDITIONS > Ballast > Additional > front frame, antal-, mass- och vattenkolumner Villkor Vattenfältet är blankt; ingen vattenmängd härleds. Provkonfiguration, inte standardutförande. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Ballastprov: tillagda vikter	Additional + weights: antal 10; totalmassa 454 kg (1000 lb); vattenkolumnen är tom. antal; kg (lb), total John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Vattenfältet är blankt; ingen vattenmängd härleds. Provkonfiguration, inte standardutförande.	Källa Originalrubrik Ballastprov: tillagda vikter Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag TEST CONDITIONS > Ballast > Additional > + weights, antal-, mass- och vattenkolumner Villkor Vattenfältet är blankt; ingen vattenmängd härleds. Provkonfiguration, inte standardutförande. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Massa för testutrustning i ballasttabellen	Test equipment: antalscellen är blank; totalmassa 86 kg (190 lb); vattenkolumnen är tom. kg (lb), total John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Raden är listad i rapportens Ballast-tabell. Tom antals- och vattencell tolkas inte som noll eller none.	Källa Originalrubrik Massa för testutrustning i ballasttabellen Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag TEST CONDITIONS > Ballast, raden Test equipment; antal-, mass- och vattenkolumner Villkor Raden är listad i rapportens Ballast-tabell. Tom antals- och vattencell tolkas inte som noll eller none. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Trepunktslänkage: dimensioner och testinställningar	Tabell 1.1: lyftarmarnas längd 468 mm (18.4 in); underlänkarnas längd 968 mm (38.1 in); lyftarmsinfästning från bakaxel 0 mm horisontellt och 327 mm (12.9 in) vertikalt; avstånd mellan underlänkspunkter 582 mm (22.9 in), mellan lyftarmsändar 746 mm (29.4 in); övre länk 705–825 mm (27.8–32.5 in), testinställning 714 mm (28.1 in); övre länkens bakaxelavstånd 384 mm (15.1 in) horisontellt och 172 mm (6.8 in) vertikalt; underlänkens bakaxelavstånd 156 mm (6.1 in) horisontellt och 330 mm (13.0 in) vertikalt; underlänkspunkt till lyftstångspunkt 716 mm (28.2 in); lyftstänger 860–947 mm (33.8–37.3 in), testinställning 947 mm (37.3 in). mm (in), range and test setting John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Provdimensioner och testinställningar, inte justeringsinstruktion eller universell inställning. Tabellens fotnot förutsätter bakdäckets dynamiska radieindex 892 mm (35.1 in).	Källa Originalrubrik Trepunktslänkage: dimensioner och testinställningar Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag Table 1.1 Linkage geometry dimensions; test-setting column; fotnot om dynamiskt däckradieindex och ISO 4251/1-1984 Villkor Provdimensioner och testinställningar, inte justeringsinstruktion eller universell inställning. Tabellens fotnot förutsätter bakdäckets dynamiska radieindex 892 mm (35.1 in). Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Dragpunkternas höjd relativt bakhjulsaxeln samt över mark i transportläge	Nedre dragpunkter relativt bakhjulsaxeln: låg position 554–678 mm (21.8–26.7 in), testinställning 660 mm (26.0 in); hög position 147–249 mm (5.8–9.8 in), testinställning 162 mm (6.4 in). Över mark i låst transportläge: 1039–1140 mm (40.9–44.9 in), testinställning 1054 mm (41.5 in). mm (in), range and test setting John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. · Tabell 1.1 skiljer höjder relativt bakhjulsaxeln i låg/hög position från höjden över mark i låst transportläge. Båda referenserna och testinställningarna bevaras; inga värden beräknas.	Källa Originalrubrik Dragpunkternas höjd relativt bakhjulsaxeln samt över mark i transportläge Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; specimen serial RW4555P001019. This is not a series-wide specification and is not assigned to 4560. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag Table 1.1, Height of lower hitch points relative to rear wheel axis; low/high/locked transport rows and Settings used on test column Villkor Tabell 1.1 skiljer höjder relativt bakhjulsaxeln i låg/hög position från höjden över mark i låst transportläge. Båda referenserna och testinställningarna bevaras; inga värden beräknas. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost

Övriga uppgifter

4555 · Övriga uppgifter
Uppgift	Värde och utförande	Källa
DLG-testad modell, drivning, serienummer och inkörning	John Deere 4555 PowerShift with mechanical front wheel drive (4WD); Nebraska Test No. 1620; OECD No. 1235; test tractor serial RW4555P001019; “1st Serial number” RW4555P001001; running-in duration 55.0 hours. model / transmission / drive / serial / hours The report’s “1st Serial number” is transcribed literally; neither serial is treated as a model-year, production-span, or general PIN boundary.	Källa Originalrubrik DLG-testad modell, drivning, serienummer och inkörning Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.1 cover and p.4 (printed p.1); title, Nebraska test number, dates, Tractor / Type / Serial Number / 1st Serial Number cells, and Duration of running in Villkor The report’s “1st Serial number” is transcribed literally; neither serial is treated as a model-year, production-span, or general PIN boundary. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost
Däck och spårvidd i testet	Firestone radial, 3-star (10-ply): front 14.9R30 and rear 18.4R42. Inflation: front 205 kPa (30 psi), rear 165 kPa (24 psi). Dynamic radius index: front 684 mm (26.9 in), rear 892 mm (35.1 in). Chosen track width: singles 1755 mm (69.1 in) front and 1765 mm (69.5 in) rear; rear duals 3277 mm (129.0 in). tire size / kPa (psi) / mm (in) Tire, pressure, radius and track-width values are the DLG test setup, not standard fitment or compatibility claims for all 4555 tractors.	Källa Originalrubrik Däck och spårvidd i testet Utförande John Deere 4555 test specimen, PowerShift with mechanical front wheel drive (MFWD/4WD), Nebraska Test No. 1620 / OECD Approval No. 1235; test period April–May 1989. This fact is scoped to the DLG specimen and is not a series-wide specification. Standard och villkor Official OECD Standard Test Code for the Testing of Agricultural Tractor Performance, C(87)53 Final, Annex II, Restricted Code; the cover prints Restricted Test-Code II. No broader model certification is implied. Marknad Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. Källperiod Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated. Underlag physical PDF p.14 (printed p.11); TEST CONDITIONS > Tire Specifications, Front Wheels / Rear Wheels cells Villkor Tire, pressure, radius and track-width values are the DLG test setup, not standard fitment or compatibility claims for all 4555 tractors. Publicerad Test conducted April–May 1989; OECD approval 15 February 1990; report signed 27 April 1990. A publication date is not separately stated. Läst 2026-10-07 John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235 Källpost

Jämför modelluppgifter

Jämför källrader för två valda profiler.

Det finns ännu ingen särskilt utvald jämförelse för den här profilen.

Välj modell

Jämförelsen visar modellernas publicerade uppgifter och villkor.

Källor

Öppna källraden för exakt publikation, villkor och variant.

John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235
Visa källrad och uppgifterna den styrker
- John Deere 4555 PowerShift with Mechanical Front Wheel Drive (4WD) — Nebraska Test 1620 / OECD Test 1235Tests conducted April–May 1989; OECD approval date 15 February 1990; signed report date 27 April 1990. No model-year or production period stated. · Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market. · [object Object]
  Styrker: DLG-testad modell, drivning, serienummer och inkörning · Testmotorns modell och grundspecifikation · Turboaggregat och angivet laddtryck · Bränsleinsprutningens pump- och injektordata · Regulator och motorvarvtal · Kylsystemets utförande och kapacitet · Färdkoppling · Växellåda och antal växlar · Kraftuttagets typ och standardutförande · Hydraullyftens systemdata · Två timmars maximal kraftuttagsprovning · Kraftuttagsprovning vid nominellt motorvarvtal · Mått under test · Massa och ballast för testkonfigurationen · Däck och spårvidd i testet · Ballastprov: bakvikter · Ballastprov: bakdubbelhjulsvikter · Ballastprov: främre ram · Ballastprov: tillagda vikter · Massa för testutrustning i ballasttabellen · Trepunktslänkage: dimensioner och testinställningar · Dragpunkternas höjd relativt bakhjulsaxeln samt över mark i transportläge · Hydraulpump: hålltryck med stillastående pump · Hydraulpump: flöde vid minimitryck och nominellt motorvarvtal · Hydraulikprov vid 90 procent av överströmningsventilens inställning · Hydraulikprov vid maximal hydraulisk effekt · Hydraulikprov: mätuttag och vätsketemperatur · Lyftprov 2.2: maximal korrigerad kraft vid dragpunkterna · Lyftprov 2.2: maximal korrigerad kraft vid ramen · Trepunktslyftprov med 44 mm assistcylinder: dragpunktskraft · Trepunktslyftprov med 44 mm assistcylinder: ramkraft · Trepunktslyftprov med 55 mm assistcylinder: dragpunktskraft · Trepunktslyftprov med 55 mm assistcylinder: ramkraft · Kraftuttagsprov, 85 procent av referensmomentet · Kraftuttagsprov, 75 procent av referensmomentet · Kraftuttagsprov, 50 procent av referensmomentet · Kraftuttagsprov, 25 procent av referensmomentet · Ekvivalent motorvridmoment vid nominellt varvtal · Ekvivalent motorvridmoment vid maximal effekt · Ekvivalent motorvridmoment vid maximalt moment

Om underlaget

Modellkod: 4555
Generation: John Deere 55 Series Row-Crop tractor; the DLG-covered specimen is a 4555 PowerShift with mechanical front wheel drive (4WD). Production/MY/PIN span is not established.
Marknad: Test site: Center for Agricultural Equipment, University of Nebraska, Lincoln, Nebraska, USA. The report does not establish sales market, Swedish availability, or the tested unit’s registered market.
Källperiod: Test period April–May 1989; OECD approval 15 February 1990 and report signature 27 April 1990. No model year, production interval, or PIN boundary is stated.

Avgränsat källunderlag · status gap · omfattning jämförelsefakta.

En fullständig granskning av hela modellguiden är inte dokumenterad.

Källbunden jämförelseprofil för ett dokumenterat4555 Powershift/MFWD-test; ännu inte en fullständig modellguide.,The DLG test specimen is specifically John Deere 4555 PowerShift with mechanical front wheel drive (4WD), serial RW4555P001019. No DLG specimen identity or performance fact is assigned to 4560.,The DLG report’s “1st Serial number” RW4555P001001 is copied literally; it is not a production start, model year, or universal PIN boundary.,UNL Test 1620 metadata names 4555 and 4560 as a paired PowerShift Diesel 15-Speed test item. DLG report No. 1235 itself names and specifies the 4555 specimen; no 4560 values are inferred.,UNL Test 1629 is a separate paired 4555/4560 Quad-Range Diesel 16-Speed report record. None of Test 1620/OECD 1235 values are carried over to that transmission or either 4560 variant.,The canonical Deere June 2016 service-sheet source already exists and explicitly has 4555-group capacity cells; no corresponding 4555 profile/fact rows exist yet. It may be separately reused in a future 4555 integration after exact row scopes are preserved.,PTO result rows are measured PTO output, not crankshaft engine power. Test mass, ballast, dimensions, tire pressure and tracks are test configuration values, not universal limits or fitments.,No sales market, Swedish availability, MY/PIN interval, 2WD or Quad-Range DLG result, 4560 result, QRT service capacity, photo, or full-guide status is proposed.

Öppna kontrollfrågor (6)

No MY, production span, or model-wide PIN range stated.
No sales market or Swedish availability established.
No 4560 specimen facts; UNL paired titles do not establish that DLG 4555 measurements apply to 4560.
No DLG facts for 4555 Quad-Range / UNL Test 1629 in this package.
Shared Deere OEM sheet is registered, but its model-specific 4555 capacity/service rows have not yet been added to a 4555 profile.
No full operator manual, service manual, general option/fitment coverage, owner evidence, or complete guide.